1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Router edge-guide clamp-on fence
This is not a fixed STL. SpeakCAD generates the router edge-guide clamp-on fence to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a router edge-guide clamp-on fence is
A clamp-on fence that turns any palm router into an edge guide with a 120 mm face and a 20–40 mm clamp for the base. A 6 mm slot lets you set offset. Print in PETG with 2.4 mm walls.
The stock edge guide only fits one base. In SpeakCAD you measure the base, preview the fence in the browser for free, then download the STL.
Example prompt
Create a router edge fence 120×20×30 mm with a 20–40 mm base clamp, 6 mm offset slot and 2.4 mm PETG walls.
People also search
router edge guide stlpalm router fence 3d printclamp on router guiderouter edge fence 3d model
Questions people ask about a router edge-guide clamp-on fence
A clamp-on fence that turns any palm router into an edge guide with a 120 mm face and a 20–40 mm clamp for the base. A 6 mm slot lets you set offset. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a router edge fence 120×20×30 mm with a 20–40 mm base clamp, 6 mm offset slot and 2.4 mm PETG walls.
The stock edge guide only fits one base. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
20 mm bench dog for Festool MFTA 20 mm bench dog 25 mm tall with a 0.1 mm taper so it drops into an MFT/3 hole and a 6 mm through-hole for a hold-down.Shimano flat-mount bleed blockA block that keeps Shimano flat-mount pistons from popping out during a bleed, 22 × 10 × 8 mm.Makita MAKPAC Type 1 bit caddyA caddy that fills a MAKPAC Type 1 (about 395 × 295 × 70 mm) with 40 impact bits on 7 mm rails.Pocket-hole drilling jig blockThis jig guides a stepped 9.5 mm pocket-hole bit at the standard 15 degree angle into the edge of 18 mm sheet goods, for pocket-screw cabinet joints without…Labeled socket organizer railLoose sockets in a drawer cost minutes on every job; a rail with sized posts keeps a 1/2 inch drive set in order and shows the size on each post.Bambu Lab build plate scraper handle with replaceable bladeA comfortable scraper for lifting stubborn prints off a Bambu Lab X1C, P1S or A1 textured PEI plate, using a standard 100 mm plastic paint scraper blade or a…