1
Organizers & storage
Bambu Lab AMS side stand with drawer
This is not a fixed STL. SpeakCAD generates the bambu lab ams side stand with drawer to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an AMS side stand, 385×295×90 mm, top recess 375×283 mm with 4 mm lips, pull-out drawer 350×260×70 mm inside, 2.4 mm walls, split in two halves.
What a bambu lab ams side stand with drawer is
A stand that holds an AMS (372 × 280 × 227 mm) beside the printer at about the height of the lid, with a pull-out drawer for nozzles, glue and the scraper. The top has a 375 × 283 mm recess with 4 mm lips, the base is 385 × 295 × 90 mm, and the drawer is 350 × 260 × 70 mm inside with a finger pull. Print in PLA or PETG as a frame split into two halves plus the drawer, 2.4 mm walls.
An AMS 2 Pro is a little taller and a different shell, so check its footprint before printing. Open the ready-made stand in SpeakCAD for free, change the height or drawer size in the viewer or the chat, then download the STL.
People also search
bambu ams stand stlams side stand with drawerbambu ams riser standams stand 3d print
Questions people ask about a bambu lab ams side stand with drawer
A stand that holds an AMS (372 × 280 × 227 mm) beside the printer at about the height of the lid, with a pull-out drawer for nozzles, glue and the scraper. The top has a 375 × 283 mm recess with 4 mm lips, the base is 385 × 295 × 90 mm, and the drawer is 350 × 260 × 70 mm inside with a finger pull. Print in PLA or PETG as a frame split into two halves plus the drawer, 2.4 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an AMS side stand, 385×295×90 mm, top recess 375×283 mm with 4 mm lips, pull-out drawer 350×260×70 mm inside, 2.4 mm walls, split in two halves.
An AMS 2 Pro is a little taller and a different shell, so check its footprint before printing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Dyson HP07 remote bedside cradleA bedside cradle for the HP07 remote so night-time oscillation changes do not mean a trip to the tower.Prusa XL PTFE tube bundle clipA clip that keeps the five 4 mm PTFE tubes of a five-toolhead Prusa XL side by side, so they do not tangle or rub on the frame when the tools swap.IKEA SKADIS tape roll holder for 76 mm coresA SKADIS arm for duct tape, masking tape and painter's tape on the standard 76 mm (3 inch) core.Spade bit wall holder, 6 to 38 mmA wall holder for 13 spade (paddle) bits from 6 to 38 mm on 1/4 inch hex shanks, about 150 mm long.Apple TV, Roku and Fire TV remote holderA sofa-side caddy with three angled slots sized to the remotes that come with streaming boxes.Bose QC Ultra 2 travel case insertA drop-in insert that turns a generic hard case into a Bose QC Ultra 2 (about 170 × 170 × 80 mm folded) nest with a 40 × 20 mm well for the USB-C cable and a…