1
Brackets & mounts
ATH-M50x mic stand headphone hook
This is not a fixed STL. SpeakCAD generates the ath-m50x mic stand headphone hook to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a headphone hook for a mic stand, clamp for 20-25 mm tubes with TPU insert and M5 bolt, 45 mm wide saddle, 60 mm arm.
What a ath-m50x mic stand headphone hook is
A hook that clamps to a microphone stand so Audio-Technica ATH-M50x studio headphones hang within reach. The clamp fits 20 to 25 mm tubes with a TPU insert and an M5 bolt, and the saddle is 45 mm wide with 15 mm radius curves that match the headband so it does not dent the padding. The arm reaches 60 mm out. Print the clamp in PETG and the insert in TPU.
Boom arms with 30 mm tubes need a larger clamp; tell the chat the tube size. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
mic stand headphone holder stlath-m50x hanger 3d printheadphone hook for microphone standstudio headphone holder
Questions people ask about a ath-m50x mic stand headphone hook
A hook that clamps to a microphone stand so Audio-Technica ATH-M50x studio headphones hang within reach. The clamp fits 20 to 25 mm tubes with a TPU insert and an M5 bolt, and the saddle is 45 mm wide with 15 mm radius curves that match the headband so it does not dent the padding. The arm reaches 60 mm out. Print the clamp in PETG and the insert in TPU.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a headphone hook for a mic stand, clamp for 20-25 mm tubes with TPU insert and M5 bolt, 45 mm wide saddle, 60 mm arm.
Boom arms with 30 mm tubes need a larger clamp; tell the chat the tube size. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Milwaukee SHOCKWAVE bit-case wall clipA clip that hangs a SHOCKWAVE bit case (about 160 × 110 × 30 mm) on a stud so the case is not in a drawer.Prusa MK4S frame webcam mountAn arm that clamps to the top of the MK4S frame, about 6 mm thick, and holds a webcam with a 1/4-20 screw, for timelapses or remote monitoring through PrusaC…Hammerhead Karoo 3 stem cap mountA stem top cap with a Garmin-style quarter-turn tab that holds a Hammerhead Karoo 3, which uses the same quarter-turn interface, above a 1 1/8 inch (28.6 mm)…Wall holder for a laptop power brickA cradle that holds a power supply brick against the wall or under a shelf, keeping it off the carpet where it collects dust and overheats.Philips Hue motion sensor corner mount bracketA wedge that lets the Philips Hue motion sensor sit in the corner of a room, where its field of view covers the whole space.AirPods Max 2 wall hook with braided cable slotA wall hook that holds AirPods Max 2 (about 188 × 168 × 83 mm) by the headband with a 20 mm padded saddle and a 8 × 40 mm slot underneath for the braided USB…