Easy CAD for 3D printing: the hand tools, and when to ask the AI

CAD words for 3D printing, explained: a beginner's glossary from boolean to tolerance

Extrude, fillet, chamfer, boolean, clearance, manifold, STL, 3MF, G-code: the CAD and printing words a beginner meets, each in one or two plain sentences.
12 November 2026 · 5 min readcadbeginnersglossary

CAD tutorials assume the words. This glossary does not: each term in one or two plain sentences, with the number that matters for printing where there is one, and where it lives in SpeakCAD when it does. Grouped by when you meet them.

Shapes and features

  • Solid. A shape with an inside and an outside, like a real object. CAD builds solids; a printer needs one.
  • Mesh. A shape described as thousands of small triangles, which is what an STL file holds. A mesh has no "hole" or "wall", only triangles, which is why changing one by number is harder than changing a CAD model.
  • Face. One flat or curved surface of a part. In SpeakCAD, you tap a face to say where a feature goes.
  • Edge. Where two faces meet. Fillets and chamfers work on edges.
  • Feature. One operation on a part: a hole, a cut, an extrude, a fillet. A CAD model is a list of features, which is what makes it editable.
  • Extrude. Pull a flat shape straight out to a thickness, or push it in to cut. In SpeakCAD, Extrude pulls a whole flat face out or pushes it in by the distance you type.
  • Boolean. Combining two solids: union (add them), difference (cut one out of the other), intersection (keep only the overlap). Every hole is a difference. Boolean cuts, explained.
  • Through hole / blind hole. A through hole goes all the way; a blind hole stops at a depth.
  • Counterbore. A wider, flat-bottomed step at the top of a hole, so a cap screw's head sits flush. For M3, about 6.5 mm across and 3.4 mm deep.
  • Countersink. A cone at the top of a hole for a flat-headed screw; about 6.6 mm across for M3. Both, with sizes.
  • Fillet. A rounded edge. Stronger at inside corners, nicer to hold on outside ones.
  • Chamfer. A flat, angled edge. On the bottom edge of a print it hides the slight bulge of the first layer. Fillet or chamfer?
  • Shell. Hollowing a solid to a set wall thickness, open on one face (a box) or closed.
  • Pattern. Copies of a feature in a line, a grid or a circle. In SpeakCAD it is Duplicate, on a placed feature's card. Hole patterns.
  • Mirror. A copy flipped across a centre line, for parts that are the same on both sides.

Sizes and fit

  • Dimension. A size or a distance given as a number. The core of every CAD: typed numbers, not shapes dragged by eye.
  • Parametric. A model whose sizes are numbers you can change later, with the rest following. Change the plate's length, and a parametric model keeps the hole where the drawing says.
  • Constraint. In sketch-based CAD (Fusion, Onshape, FreeCAD), a rule on a sketch: this line is horizontal, these two are equal, this point is 6 mm from that edge.
  • Tolerance. How far a real size can differ from the drawing. An FDM printer is typically within 0.1 to 0.3 mm.
  • Clearance. The gap you design in on purpose between parts that fit together: 0.1 to 0.2 mm for a press fit, 0.4 to 0.6 mm for a sliding fit. Tolerances and clearances.
  • Clearance hole. A hole a screw slides through: M3 is 3.4 mm, not 3. A tapping hole is smaller (M3: 2.5 mm), so the screw cuts its own thread into the plastic.
  • Press fit. Parts held by friction: a magnet, a bearing, a peg. 0.1 mm decides it, which is why it is worth a test print.
  • Wall thickness. At least 1.2 mm (three lines of a 0.4 mm nozzle); 1.6 to 2 mm for most parts. Wall thickness.
  • Overhang. A part of the model that hangs out over nothing. Up to about 45° prints clean; beyond, it needs supports or a different orientation. Why prints need supports.
  • Bridge. A flat span printed in the air between two supports, like the top of a horizontal hole. Short bridges print fine.

Files

  • STL. The most common print file: a mesh, no units, no colours. STL vs 3MF.
  • 3MF. The newer print file: a mesh with units, and room for colours and settings. Prefer it when your slicer reads it.
  • STEP. The file engineers exchange: an exact solid, not a mesh. Needed by machinists; not needed by a printer. SpeakCAD does not export STEP.
  • G-code. The instructions your printer runs, line by line: move here, extrude this much. Made by a slicer from an STL or 3MF, for one printer. SpeakCAD can slice it for 380+ printers. STL to G-code.
  • Slicer. The program that turns a model into G-code: OrcaSlicer, PrusaSlicer, Cura, Bambu Studio, or an online one.
  • Manifold (watertight). A mesh with no holes or loose faces, so it has a clear inside. Slicers need it; CAD solids are manifold by construction, sculpted or downloaded meshes not always.
  • .scad. An OpenSCAD file: a part written as a short program. SpeakCAD's AI writes OpenSCAD and compiles it into the file you download.

Ways of working

  • Sketch. A 2D drawing on a plane, with dimensions and constraints, that features are built from. The first step in Fusion, Onshape and FreeCAD.
  • Workplane. The flat grid you place shapes on, in Tinkercad and others.
  • Timeline (history). The ordered list of features in a parametric CAD. Edit an early step and the later ones replay, which is powerful and sometimes breaks them.
  • Direct modelling. Changing a solid by pushing and pulling its faces, without a history. Shapr3D works this way.
  • CSG. Constructive solid geometry: building parts from simple solids with booleans. OpenSCAD, and SpeakCAD under the hood.

Where to start

The ideas behind most of these words come with your first few parts. CAD for beginners has a first week of parts in order, each adding one idea; the hand tools guide shows Hole, Cut, Add, Extrude, Text, Round, Fillet, Shell and Measure on one part.

Shaping a part by hand (a hole, a cut, an added shape, text, rounded corners, a shell, every size typed in millimetres) is free, and so is downloading what you shaped. With the AI, a request spends credits for the work it takes: a quick edit usually 1–2, a small change 1–2, a new part or a design change 3–8, never more than 15 credits; on a plan the first 3 small changes of each part are free; without a plan a new part spends 3. Start with Maker: 50 credits a month for $7.99, cancel anytime.

Questions

Extrude pulls a flat shape or face straight out to a thickness, or pushes it in to cut. A rectangle extruded 3 mm becomes a plate 3 mm thick.

A fillet rounds an edge; a chamfer cuts it at an angle. For 3D printing, a chamfer on the bottom edge prints cleaner than a fillet, and a fillet on an inside corner makes the part stronger.

The gap designed in between two parts that fit together, because printed parts come out slightly off size: 0.1 to 0.2 mm for a press fit, 0.4 to 0.6 mm for a sliding fit. A clearance hole for an M3 screw is 3.4 mm.

That the mesh is closed, with no holes or loose faces, so it has a clear inside and outside. Slicers need a manifold mesh; parts made in CAD are manifold by construction, sculpted or downloaded meshes not always.

Shape it by hand, free

Open a box or a plate, tap where the hole goes, type the size and download the STL with a free account; the AI is there when you would rather describe the part, at 4 credits a part on a plan, its first 3 small changes free.