1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
ZSA Moonlander tenting legs set
This is not a fixed STL. SpeakCAD generates the zsa moonlander tenting legs set to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a zsa moonlander tenting legs set is
A set of four screw-in tenting legs for a ZSA Moonlander that replace the stock 8 mm feet with 15, 25 and 40 mm options. Each leg is M4 threaded to match the board, 16 mm across with a 10 mm rubber-foot recess, and a 2 mm hex socket on top for installation. Print a pair of each height in PETG.
Generic M4 legs bottom out on the Moonlander's recessed inserts. Describe the tenting angle you want in SpeakCAD, preview the legs in the browser without paying, then download the STL.
Example prompt
Model Moonlander tenting legs, M4 thread, 16 mm diameter, heights 15, 25 and 40 mm, 10 mm rubber-foot recess, 2 mm hex socket, PETG, two of each height.
People also search
moonlander tenting legs stlzsa moonlander feet 3d printmoonlander tenting kitzsa moonlander leg set 3d model
Questions people ask about a zsa moonlander tenting legs set
A set of four screw-in tenting legs for a ZSA Moonlander that replace the stock 8 mm feet with 15, 25 and 40 mm options. Each leg is M4 threaded to match the board, 16 mm across with a 10 mm rubber-foot recess, and a 2 mm hex socket on top for installation. Print a pair of each height in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model Moonlander tenting legs, M4 thread, 16 mm diameter, heights 15, 25 and 40 mm, 10 mm rubber-foot recess, 2 mm hex socket, PETG, two of each height.
Generic M4 legs bottom out on the Moonlander's recessed inserts. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Studio Display tilt-stop wedgeA 12 mm wedge that sits under a Studio Display stand so the screen cannot droop below 10 degrees on a polished desk.MacBook Air 15 M4 MagSafe right-side clipA clip that hangs from the right edge of a 15-inch MacBook Air M4 and holds the MagSafe 3 cable at chassis height so the tip does not scratch the aluminium.Keychron V1 Max tenting feetA set of screw-in tenting feet for a V1 Max that replace the stock 8 mm feet with 12, 20 and 30 mm options.Sloped wrist rest for mechanical keyboardA palm rest that matches the front height of a mechanical keyboard so your wrists stay level while typing.Akai MPK Mini MK3 keyboard stand with laptop shelfA two-tier stand that lifts an Akai MPK Mini MK3 or MPK Mini Plus (318 x 181 x 44 mm) 20 mm off the desk at a 10 degree angle and raises a 13 to 16 inch lapt…Sonos Move 2 charging-cradle riserA 20 mm riser under a Move 2 cradle so the speaker clears a deep windowsill lip.