1
Hobby & gaming
Xbox Series S vertical stand with cable channel
This is not a fixed STL. SpeakCAD generates the xbox series s vertical stand with cable channel to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model an Xbox Series S vertical stand, 160×110 mm base, 65.5 mm wide cradle 20 mm deep, 12 mm rear cable channel, TPU pad pockets, 4 mm walls.
What a xbox series s vertical stand with cable channel is
A vertical stand for an Xbox Series S (275 × 151 × 63.5 mm) with a 65.5 mm wide cradle, 20 mm deep, that sits the console on its long edge with the black vent facing up. The 160 × 110 mm base has a 12 mm channel under the rear for the power and HDMI cables and pockets for TPU pads. Print in PETG flat, 4 mm walls.
The Series X is square at 151 mm and does not fit this cradle. Open the ready-made stand in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
xbox series s stand stlxbox series s vertical stand 3d printxbox series s holderxbox series s stand 3d model
Questions people ask about a xbox series s vertical stand with cable channel
A vertical stand for an Xbox Series S (275 × 151 × 63.5 mm) with a 65.5 mm wide cradle, 20 mm deep, that sits the console on its long edge with the black vent facing up. The 160 × 110 mm base has a 12 mm channel under the rear for the power and HDMI cables and pockets for TPU pads. Print in PETG flat, 4 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model an Xbox Series S vertical stand, 160×110 mm base, 65.5 mm wide cradle 20 mm deep, 12 mm rear cable channel, TPU pad pockets, 4 mm walls.
The Series X is square at 151 mm and does not fit this cradle. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Sim rig aluminium profile phone mountA phone mount for a 40 series aluminium profile sim rig (40 × 40 or 40 × 80 mm with an 8 mm slot) that bolts into the slot with an M6 bolt and T-nut and hold…Round miniature bases with slotSlotted round bases hold metal or resin miniatures with a tab underneath, and buying them in odd sizes gets expensive.Nintendo Switch Joy-Con comfort grip for single controllerA palm-filling grip that a single Joy-Con slides onto for sideways two-player sessions in Mario Kart or Smash.Wingspan board game card and token insertA drop-in insert for the Stonemaier Wingspan base box (interior about 292 x 218 x 65 mm) that holds the 170 sleeved bird cards, bonus cards, food tokens, egg…Xbox Elite Series 3 paddle standA stand that holds an Elite Series 3 without flattening the rear paddles, 30 mm clearance and a 14 mm USB-C slot.Nintendo Switch 2 Joy-Con wall hooksA pair of hooks that hang Switch 2 Joy-Con (about 110 × 30 × 25 mm each) on a wall so they are not in a bowl.