1
Replacement parts
Whirlpool dishwasher tine row pivot clip
This is not a fixed STL. SpeakCAD generates the whirlpool dishwasher tine row pivot clip to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Whirlpool dishwasher tine row pivot clip, 3.5 mm bearing hole, 3.2 mm snap for the tine wire, 14 mm wide, 1.8 mm walls, PETG.
What a whirlpool dishwasher tine row pivot clip is
A pivot clip for the folding tine rows in Whirlpool and KitchenAid lower racks, which lets the row fold flat and stay on the rack. It wraps the rack wire with a 3.5 mm bearing hole and holds the tine row wire in a 3.2 mm snap, 14 mm wide with 1.8 mm walls. Print on its side in PETG.
Bosch clips are sized for thinner wire and will not seat on a Whirlpool rack. Open the model in SpeakCAD for free, change the hole sizes in the chat or the viewer, then download the STL.
People also search
whirlpool dishwasher tine clipkitchenaid dishwasher tine pivotwhirlpool dishwasher rack clip 3d printdishwasher tine row clip stl
Questions people ask about a whirlpool dishwasher tine row pivot clip
A pivot clip for the folding tine rows in Whirlpool and KitchenAid lower racks, which lets the row fold flat and stay on the rack. It wraps the rack wire with a 3.5 mm bearing hole and holds the tine row wire in a 3.2 mm snap, 14 mm wide with 1.8 mm walls. Print on its side in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Whirlpool dishwasher tine row pivot clip, 3.5 mm bearing hole, 3.2 mm snap for the tine wire, 14 mm wide, 1.8 mm walls, PETG.
Bosch clips are sized for thinner wire and will not seat on a Whirlpool rack. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Creality K1 lid riserA riser frame that sits on top of a Creality K1 (355 × 355 × 480 mm) and holds the glass lid 25 mm higher, letting heat out when printing PLA so the hotend a…Samsung fridge door bin side clipA side clip for Samsung fridge door bins, the small tab that holds the clear bin onto the ribs of the door liner and snaps when the bin is overloaded.Kenwood Chef slow outlet coverA replacement cover for the front slow-speed outlet of Kenwood Chef mixers, the twist-on cap that keeps flour out of the drive.Extension cord reel crank handleCable reels are wound by a folding crank handle whose plastic knob and pivot break long before the cable does.Digital-caliper SR44 battery-door replacementA snap-in battery door for a 150 mm digital caliper that takes an SR44 / 357 cell, 16 mm across with a 0.6 mm lip.IKEA BROR caster brake wedgeA wedge that chocks a BROR 100 mm caster so the trolley does not roll when you open a drawer.