1
Enclosures & cases
Waveshare 2.13 inch e-paper frame
This is not a fixed STL. SpeakCAD generates the waveshare 2.13 inch e-paper frame to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a 2.13 inch e-paper frame 72×40×22 mm, 49×24 mm window, pocket for 65×30.2 mm HAT and Pi Zero, 15 degree kickstand.
What a waveshare 2.13 inch e-paper frame is
A small desk frame for the Waveshare 2.13 inch e-Paper HAT (65 × 30.2 mm). The window is 49 × 24 mm over the active area, the back pocket takes the HAT plus a Pi Zero 2 W or ESP32 behind it, and a 15 degree kickstand is part of the back. The frame is 72 × 40 × 22 mm with 1.6 mm walls. Print the front face-down in PLA.
The raw 2.13 inch panel with a flex cable has no PCB and needs a thinner frame. Open the ready-made model in SpeakCAD for free, adjust the window and pocket, then download the STL.
People also search
waveshare 2.13 e-paper case stl2.13 inch e-ink frame 3d printe-paper hat enclosure2.13 epaper case 3d model
Questions people ask about a waveshare 2.13 inch e-paper frame
A small desk frame for the Waveshare 2.13 inch e-Paper HAT (65 × 30.2 mm). The window is 49 × 24 mm over the active area, the back pocket takes the HAT plus a Pi Zero 2 W or ESP32 behind it, and a 15 degree kickstand is part of the back. The frame is 72 × 40 × 22 mm with 1.6 mm walls. Print the front face-down in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a 2.13 inch e-paper frame 72×40×22 mm, 49×24 mm window, pocket for 65×30.2 mm HAT and Pi Zero, 15 degree kickstand.
The raw 2.13 inch panel with a flex cable has no PCB and needs a thinner frame. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Matter Thread border-router case for nRFA vented case for an nRF52840 Thread border-router board with SMA and USB-C cutouts.Raspberry Pi 3B+ caseA two-part case for a Raspberry Pi 3 Model B+ (85 × 56 mm).2S BMS and 18650 pack holderA holder for two 18650 cells in series (each 18 × 65 mm) with a 2S BMS board (about 46 × 20 mm) on the side.ESPHome thermostat wall box with OLEDA wall box for a DIY ESPHome thermostat: an ESP32 DevKitC (54.4 × 27.9 mm), a 0.96 inch SSD1306 OLED (27 × 27 mm module) behind a 23 × 12 mm window and two 1…Battery pack case for three AA cells with switchA compact holder for three AA cells side by side, with a slot for a standard 19 x 13 mm slide switch and a wire exit, giving a 4.5 V supply for LED strips, s…Heltec LoRa V3 Meshtastic case with SMA antenna holeA rugged node case for the Heltec WiFi LoRa 32 V3, the board most Meshtastic beginners start with.