1
Brackets & mounts
Wahoo ELEMNT ROAM v2 out-front mount for 31.8 mm bars
This is not a fixed STL. SpeakCAD generates the wahoo elemnt roam v2 out-front mount for 31.8 mm bars to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Wahoo ELEMNT ROAM out-front mount, 31.8 mm clamp with two M4 bolts, 60 mm arm, Wahoo wedge interface, GoPro prong underneath.
What a wahoo elemnt roam v2 out-front mount for 31.8 mm bars is
An out-front mount for 31.8 mm handlebars that holds a Wahoo ELEMNT ROAM v2 ahead of the stem on Wahoo's wedge interface. The clamp closes with two M4 bolts, the arm reaches 60 mm forward so the unit lines up with the stem face, and a GoPro prong under the arm takes a front light. Print on its side in PETG or ASA with 100 percent infill in the wedge.
Older ROAM and BOLT units use the same wedge, but check the arm length for the larger ROAM. Open the ready-made mount in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
wahoo roam mountwahoo elemnt roam out front mount stlwahoo mount 31.8 3d printwahoo roam v2 bar mount
Questions people ask about a wahoo elemnt roam v2 out-front mount for 31.8 mm bars
An out-front mount for 31.8 mm handlebars that holds a Wahoo ELEMNT ROAM v2 ahead of the stem on Wahoo's wedge interface. The clamp closes with two M4 bolts, the arm reaches 60 mm forward so the unit lines up with the stem face, and a GoPro prong under the arm takes a front light. Print on its side in PETG or ASA with 100 percent infill in the wedge.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Wahoo ELEMNT ROAM out-front mount, 31.8 mm clamp with two M4 bolts, 60 mm arm, Wahoo wedge interface, GoPro prong underneath.
Older ROAM and BOLT units use the same wedge, but check the arm length for the larger ROAM. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
GL.iNet Beryl AX travel router mountA strap-on mount for a GL.iNet Beryl AX (GL-MT3000, about 120 × 83 × 34 mm) that holds it on a desk leg, van wall or hotel TV cable.Quad Lock compatible motorcycle mirror bolt mountA plate that slips under a motorcycle mirror and holds a Quad Lock style twist head above the controls.Curtain rod bracket for a 25 mm poleA replacement or extra bracket for a 25 mm curtain pole when the set came with too few or one broke.Kettlebell wall rack hook for garage gymA hook that hangs a light kettlebell (up to about 12 kg) by its handle against a garage wall, freeing floor space beside the squat rack.Valve Index headset and controller wall mountA combined wall station for the Valve Index headset and its two Knuckles controllers.Dyson Gen5detect Fluffy head wall hookA hook that hangs the Gen5detect Fluffy soft roller (about 250 mm wide) next to the dock so the roller is not crushed in a cupboard.