1
Hobby & gaming
VR cable ceiling pulley clip
This is not a fixed STL. SpeakCAD generates the vr cable ceiling pulley clip to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a VR cable ceiling pulley, 50×50 mm plate, 20 mm yoke, 40 mm wheel with 7 mm groove on an M4 bolt, loop for a 4–6 mm cable.
What a vr cable ceiling pulley clip is
A ceiling clip for a PCVR cable management system: a 40 mm pulley wheel with a 7 mm groove turns on an M4 bolt inside a 20 mm wide yoke, and a spring loop holds a 4 to 6 mm Link or DisplayPort cable. The ceiling plate is 50 × 50 mm with two 4 mm screw holes. Print the wheel flat in PETG and the yoke on its side.
Thin 3 mm fibre cables slip in a 7 mm groove, so narrow it for those. Open the pulley in SpeakCAD without paying, adjust it in the chat or the viewer, then download the STL.
People also search
vr cable pulley stlvr cable management ceiling 3d printquest link cable pulleypcvr cable ceiling hook
Questions people ask about a vr cable ceiling pulley clip
A ceiling clip for a PCVR cable management system: a 40 mm pulley wheel with a 7 mm groove turns on an M4 bolt inside a 20 mm wide yoke, and a spring loop holds a 4 to 6 mm Link or DisplayPort cable. The ceiling plate is 50 × 50 mm with two 4 mm screw holes. Print the wheel flat in PETG and the yoke on its side.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a VR cable ceiling pulley, 50×50 mm plate, 20 mm yoke, 40 mm wheel with 7 mm groove on an M4 bolt, loop for a 4–6 mm cable.
Thin 3 mm fibre cables slip in a 7 mm groove, so narrow it for those. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
ASUS ROG Ally charging stand with angled cradleAn angled cradle for the ASUS ROG Ally and ROG Ally X (280 x 111 x 21 mm at the body, up to 32 mm at the grips) that keeps the handheld upright on a desk whi…Nintendo Switch 2 Joy-Con charging grip standA desk stand that holds a Switch 2 Joy-Con charging grip (about 155 × 110 × 45 mm) upright with the USB-C port at the bottom open.Lenovo Legion Go 2 kickstand extensionAn extension that adds 20 mm to a Legion Go 2 kickstand so the screen sits at 60 degrees on a couch.DualSense wall rack for four controllersA wall rack for four PS5 DualSense controllers (160 × 66 × 106 mm) hung by the gap between the grips.Sim rig aluminium profile phone mountA phone mount for a 40 series aluminium profile sim rig (40 × 40 or 40 × 80 mm with an 8 mm slot) that bolts into the slot with an M6 bolt and T-nut and hold…Round miniature bases with slotSlotted round bases hold metal or resin miniatures with a tab underneath, and buying them in odd sizes gets expensive.