1
Organizers & storage
Voron Trident scraper holder for 2020 frame
This is not a fixed STL. SpeakCAD generates the voron trident scraper holder for 2020 frame to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a scraper holder for a 2020 extrusion, 70×3 mm blade slot 40 mm deep, 12 mm brush hole, M5 T-nut hole, 20 mm back.
What a voron trident scraper holder for 2020 frame is
A scraper holder that bolts to the outside of a Voron Trident 2020 frame so the spatula is at hand without opening the doors. It has a 70 × 3 mm blade slot 40 mm deep, a 12 mm hole for a brush, an M5 T-nut hole and a 20 mm wide back. Print in ASA or PETG, on its back.
A holder for a 2040 extrusion is twice as tall and does not sit flat on 2020. Open the ready-made holder in SpeakCAD for free, adjust the blade slot in the viewer or the chat, then download the STL.
People also search
voron scraper holder stlvoron trident scraper holder2020 scraper holdervoron tool holder 3d print
Questions people ask about a voron trident scraper holder for 2020 frame
A scraper holder that bolts to the outside of a Voron Trident 2020 frame so the spatula is at hand without opening the doors. It has a 70 × 3 mm blade slot 40 mm deep, a 12 mm hole for a brush, an M5 T-nut hole and a 20 mm wide back. Print in ASA or PETG, on its back.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a scraper holder for a 2020 extrusion, 70×3 mm blade slot 40 mm deep, 12 mm brush hole, M5 T-nut hole, 20 mm back.
A holder for a 2040 extrusion is twice as tall and does not sit flat on 2020. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Folding hex-key set wall holderA wall plate that holds two folding hex sets (metric and imperial) in 22 × 10 mm pockets with a 4.5 mm hole pair.Milwaukee Packout rolling-box handle hookA hook that clips onto the Packout rolling-box handle (about 30 mm) and holds a tape, knife or badge so they are not in a pocket.Nintendo Switch game case shelf holder for 10 casesA shelf holder for ten Nintendo Switch or Switch 2 retail cases (170 × 105 × 11 mm) standing spine-out like books.French cleat screwdriver rack, 12 slotsA 12-slot French cleat screwdriver rack in two rows.Watch strap storage rack with numbered slotsA rack that stores spare smartwatch or quick-release straps flat and separated so silicone and leather bands do not stick together or curl.IKEA Pax clothes rail hook for bags and beltsA hook that hangs from the Komplement clothes rail inside an IKEA Pax wardrobe and holds handbags, belts, ties or a laundry bag without taking a hanger slot.