1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
Volvo EX30 console coin well
This is not a fixed STL. SpeakCAD generates the volvo ex30 console coin well to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a volvo ex30 console coin well is
A well that sits in the EX30 centre console (about 140 × 80 mm) and holds coins, a card and a USB-C tip. The plate is 136 × 76 × 14 mm. Print in PETG with 1.6 mm walls.
The Macan Electric key tray is a different well. Tell SpeakCAD Single vs Twin Motor, preview the well in the browser without paying, then download the STL.
Example prompt
Model an EX30 console coin well 136×76×14 mm with coin, card and USB-C slots, 1.6 mm PETG.
People also search
ex30 tray stlvolvo ex30 console organizer 3d printex30 coin holdervolvo ex30 insert 3d model
Questions people ask about a volvo ex30 console coin well
A well that sits in the EX30 centre console (about 140 × 80 mm) and holds coins, a card and a USB-C tip. The plate is 136 × 76 × 14 mm. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an EX30 console coin well 136×76×14 mm with coin, card and USB-C slots, 1.6 mm PETG.
The Macan Electric key tray is a different well. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Garmin Edge 540 out-front mount 22.2 mmAn out-front mount that puts an Edge 540 on a 22.2 mm road bar with a Garmin quarter-turn and a GoPro boss underneath.Raised feeder stand for small dogsA raised feeder lifts food and water bowls to a comfortable height for small dogs and older pets with stiff necks.iPhone 16 Pro camera lens protector bumper frameA thin raised frame that sticks around the camera plateau of an iPhone 16 Pro, the rounded square that stands about 3 mm proud of the back and measures rough…MAM pacifier clip with ring loop and strap slotA pacifier clip that fastens to a bib or shirt and holds a MAM, Philips Avent or NUK pacifier by its ring so it stops hitting the floor.Cybertruck vault-bin dividerA divider that splits a Cybertruck vault bin into two 150 mm wells for straps and a lock.AirTag house-key silent snap fobA silent fob that holds an AirTag and a house key on a 6 mm ring without the rattle of Apple's plastic case.