MAM pacifier clip with ring loop and strap slot
A pacifier clip that fastens to a bib or shirt and holds a MAM, Philips Avent or NUK pacifier by its ring so it stops hitting the floor. The clip body is 40 by 20 mm with a 2 mm wall and a spring hinge on a 3 mm pin, a 25 mm slot at one end for a 20 mm wide fabric strap, and a 12 mm split ring that threads through the pacifier handle. Edges have 1.5 mm fillets and no small detachable parts, and it prints flat in one piece in PETG. This is a printed accessory, not a certified baby product, so check it after every wash and never leave it in a crib.
Strap widths and pacifier ring sizes differ between brands, so a clip generated to your pacifier and strap holds better than a generic one. In SpeakCAD you give the ring and strap dimensions, preview the clip in the browser at no cost, adjust the spring in the chat and download the STL.
Create a pacifier clip 40 mm long, 20 mm wide and 8 mm thick with 2 mm walls, a spring-hinged jaw on a 3 mm pin, a 25 x 3 mm strap slot at one end, a 12 mm split ring for a MAM pacifier handle at the other and 1.5 mm fillets on every edge.