1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
Shokz OpenSwim Pro goggle strap clip
This is not a fixed STL. SpeakCAD generates the shokz openswim pro goggle strap clip to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a shokz openswim pro goggle strap clip is
A clip that parks Shokz OpenSwim Pro bone-conduction headphones (about 16 mm band) on a 12–20 mm swim-goggle strap so they do not slide during flip turns. Two 18 mm jaws with 1 mm walls and a 0.3 mm gap snap over the strap, and a 17 mm saddle holds the band. Print two clips in PETG, mirrored, with 0.2 mm clearance.
OpenRun clips are too wide for the slimmer OpenSwim Pro band. Tell SpeakCAD your strap width, preview the clip in the browser without paying, then download the STL.
Example prompt
Model a Shokz OpenSwim Pro goggle clip: 18 mm jaws for a 12–20 mm strap, 0.3 mm snap gap, 17 mm headphone saddle, 1 mm PETG walls, printed as a mirrored pair.
People also search
shokz openswim pro clip stlopenswim pro goggle mount 3d printshokz swim headphone clipopenswim pro strap holder 3d model
Questions people ask about a shokz openswim pro goggle strap clip
A clip that parks Shokz OpenSwim Pro bone-conduction headphones (about 16 mm band) on a 12–20 mm swim-goggle strap so they do not slide during flip turns. Two 18 mm jaws with 1 mm walls and a 0.3 mm gap snap over the strap, and a 17 mm saddle holds the band. Print two clips in PETG, mirrored, with 0.2 mm clearance.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Shokz OpenSwim Pro goggle clip: 18 mm jaws for a 12–20 mm strap, 0.3 mm snap gap, 17 mm headphone saddle, 1 mm PETG walls, printed as a mirrored pair.
OpenRun clips are too wide for the slimmer OpenSwim Pro band. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Van cabinet magnetic key hookCampervans and work vans rarely have a good place for keys, and a hook that mounts with a magnet moves without drilling.EDC pocket organizer clip for pen and torchAn EDC organizer clip holds a pen and a small torch together on a pocket edge so they do not sink to the bottom.Litter-Robot 3 step ramp for small cats and kittensA step that sits in front of a Litter-Robot 3 or Litter-Robot 4 and lowers the jump into the globe, which is around 250 mm off the floor and too high for a k…Cybertruck vault-bin dividerA divider that splits a Cybertruck vault bin into two 150 mm wells for straps and a lock.AirTag house-key silent snap fobA silent fob that holds an AirTag and a house key on a 6 mm ring without the rattle of Apple's plastic case.Trek Checkpoint top-tube AirTag mountA mount that hides an AirTag under a Checkpoint top-tube bag boss so the tag is not in a saddle bag.