1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
Rivian R1S Gen 2 console tray
This is not a fixed STL. SpeakCAD generates the rivian r1s gen 2 console tray to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a rivian r1s gen 2 console tray is
A tray that sits in an R1S Gen 2 console bin and splits keys, cards and a USB-C cable, 180 × 90 × 30 mm with 1.2 mm walls. Print in PETG.
The bin is a well. In SpeakCAD you measure the bin, preview the tray in the browser for free, then download the STL.
Example prompt
Create an R1S Gen 2 console tray 180×90×30 mm with key, card and cable wells, 1.2 mm PETG.
People also search
rivian r1s console tray stlr1s gen 2 organizer 3d printrivian center console insertr1s tray 3d model
Questions people ask about a rivian r1s gen 2 console tray
A tray that sits in an R1S Gen 2 console bin and splits keys, cards and a USB-C cable, 180 × 90 × 30 mm with 1.2 mm walls. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an R1S Gen 2 console tray 180×90×30 mm with key, card and cable wells, 1.2 mm PETG.
The bin is a well. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Subaru Outback cargo-bin dividerA divider that splits the Outback side cargo bin (about 350 × 160 mm) so a lock and a washer fluid bottle stay put.Bottle cage tool holder insertA tool holder shaped like a water bottle drops into a spare bottle cage and carries a tube, CO2 cartridge and multitool without a saddle bag.Shower shelf razor and bottle clipShower shelves fill up with bottles and razors that fall off the moment you reach for shampoo.Race bib magnetic holder clips for running vestA set of four magnetic bib holders that pin a race number to a Salomon or Nike running vest, a Hoka singlet or a cycling jersey without safety pins puncturin…BabyBjörn bouncer toy-bar clipA clip that hangs a toy bar on a BabyBjörn bouncer frame, 18 mm snap and a 8 mm ring.Meshtastic T-Deck Plus dash cradleA dash cradle that holds a T-Deck Plus at 40 degrees with a 14 mm USB-C slot and a 20 mm antenna clearance.