1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Vitamix Explorian E310 blade-cover stand
This is not a fixed STL. SpeakCAD generates the vitamix explorian e310 blade-cover stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a vitamix explorian e310 blade-cover stand is
A stand that holds an E310 container (about 180 mm across the blade) upside down with a 40 mm blade clearance so the jar dries without dulling the blade on the rack. The ring is 160 mm ID on a 180 mm base. Print in PETG with 2.4 mm walls.
The Ascent tamper holster is a different jar. In SpeakCAD you confirm E310 vs E320, preview the stand in the browser at no cost, then download the STL.
Example prompt
Design an E310 blade-cover stand 180 mm base, 160 mm ID ring, 40 mm blade clearance, 2.4 mm PETG.
People also search
vitamix e310 stand stlexplorian blade cover 3d printvitamix jar drying stande310 container holder 3d model
Questions people ask about a vitamix explorian e310 blade-cover stand
A stand that holds an E310 container (about 180 mm across the blade) upside down with a 40 mm blade clearance so the jar dries without dulling the blade on the rack. The ring is 160 mm ID on a 180 mm base. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an E310 blade-cover stand 180 mm base, 160 mm ID ring, 40 mm blade clearance, 2.4 mm PETG.
The Ascent tamper holster is a different jar. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Nespresso Vertuo Plus capsule bin for 30 podsA bin that sits beside a Vertuo Plus and holds 30 used capsules in a 160 × 120 × 140 mm well with a 4 mm drip lip so coffee does not hit the counter.Family toothbrush holder with drip drainA counter stand that separates four toothbrushes and a tube of toothpaste so heads never touch and water drips through rather than pooling.Sofa arm remote control caddyA saddle that drapes over the arm of a sofa or chair and holds remotes and a phone within reach.Gaggia Classic 58 mm tamper stand and portafilter holderA combined tamper stand and portafilter rest for the Gaggia Classic Pro or any machine using a 58 mm basket, including Rancilio Silvia and Lelit.Breville Barista Pro 54 mm dosing funnelA 54 mm dosing funnel that sits on a Barista Pro portafilter with a 55 mm ID and a 12 mm wall so a WDT tool does not flick grounds.Roborock Q Revo 20 mm threshold rampA 400 × 80 × 20 mm ramp that lets a Q Revo climb a 20 mm doorway bar.