1
Brackets & mounts
UniFi Cloud Gateway Ultra wall mount
This is not a fixed STL. SpeakCAD generates the unifi cloud gateway ultra wall mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a UCG Ultra wall mount, 143×31 mm on-edge cradle, open bottom for ports, vent windows, two 4 mm holes 100 mm apart, PETG.
What a unifi cloud gateway ultra wall mount is
A wall mount for a UniFi Cloud Gateway Ultra (141.8 × 127.6 × 30 mm) that holds it on edge with the ports facing down. The cradle is 143 × 31 mm with 0.6 mm clearance, open at the bottom, with vent windows on both faces and two 4 mm holes 100 mm apart. Print in PETG, 2 mm walls.
The UniFi Express 7 is a small square unit and needs its own shelf. Open the model in SpeakCAD without paying, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
ucg ultra wall mount stlunifi cloud gateway ultra mount 3d printucg ultra bracketunifi gateway wall holder 3d model
Questions people ask about a unifi cloud gateway ultra wall mount
A wall mount for a UniFi Cloud Gateway Ultra (141.8 × 127.6 × 30 mm) that holds it on edge with the ports facing down. The cradle is 143 × 31 mm with 0.6 mm clearance, open at the bottom, with vent windows on both faces and two 4 mm holes 100 mm apart. Print in PETG, 2 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a UCG Ultra wall mount, 143×31 mm on-edge cradle, open bottom for ports, vent windows, two 4 mm holes 100 mm apart, PETG.
The UniFi Express 7 is a small square unit and needs its own shelf. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Wall mount bracket for a Wi-Fi routerThis bracket gets a flat router off the floor and onto the wall behind the TV or in a utility closet, keeping cables tidy.reMarkable 2 wall mount holder with Marker slotA wall holder for the reMarkable 2 tablet (187 x 246 x 4.7 mm) that keeps it and its Marker within reach beside a desk or on a kitchen wall for the shopping…Wyze Cam v3 corner wall mount with rain hoodA corner bracket for the Wyze Cam v3, a 51 x 53 x 58 mm camera with a 1/4 inch-20 thread in its base.Pedaltrain Classic pedalboard riser for Boss pedalsA rear-row riser that clips onto the two back rails of a Pedaltrain Classic or Classic Jr and lifts a Boss compact pedal (73 x 129 x 59 mm) by 40 mm so its f…Dyson HP09 remote wall clipA clip that hangs the HP09 Formaldehyde remote next to a light switch so it is not the curved thing on the floor.Peloton Bike+ phone shelfA shelf that clips onto a Bike+ handlebar (about 40 mm) and holds a phone at 15 degrees so you are not stacking it on the tablet.