1
Brackets & mounts
TP-Link TL-SG105 under-desk mount
This is not a fixed STL. SpeakCAD generates the tp-link tl-sg105 under-desk mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design TL-SG105 under-desk rails, pair of L rails 26 mm deep with 2 mm lip, 102 mm apart, two 4 mm holes each, 2.4 mm PETG.
What a tp-link tl-sg105 under-desk mount is
An under-desk mount for a TP-Link TL-SG105 5-port switch (100 × 98 × 25 mm) so the switch hangs out of sight with the ports facing you. Two L-shaped rails are 26 mm deep with a 2 mm lip, 102 mm apart, and each has two 4 mm screw holes. Print in PETG, 2.4 mm walls.
The 8-port TL-SG108 is 158 mm wide. Open the ready-made rails in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
tl-sg105 mount stltp-link switch under desk 3d print5 port switch brackettl-sg105 holder 3d model
Questions people ask about a tp-link tl-sg105 under-desk mount
An under-desk mount for a TP-Link TL-SG105 5-port switch (100 × 98 × 25 mm) so the switch hangs out of sight with the ports facing you. Two L-shaped rails are 26 mm deep with a 2 mm lip, 102 mm apart, and each has two 4 mm screw holes. Print in PETG, 2.4 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design TL-SG105 under-desk rails, pair of L rails 26 mm deep with 2 mm lip, 102 mm apart, two 4 mm holes each, 2.4 mm PETG.
The 8-port TL-SG108 is 158 mm wide. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Wall mount plate for a Raspberry Pi 4A flat carrier plate that screws to a wall or cabinet and holds a bare Raspberry Pi 4 on standoffs, keeping all ports reachable and the board open for cooling.Garmin Edge 540 low profile stem cap mountA stem cap mount replaces the top cap on a 1 1/8 inch steerer and puts a Garmin Edge 540 or 840 directly above the stem, the tidiest position for a commuter,…IKEA Skadis hook for Knipex Cobra and combination pliersA double-prong Skadis hook that hangs a Knipex Cobra 250 or combination pliers by the open jaws so the handles dangle in reach.DJI Osmo Pocket 3 desk cradle with tripod threadA weighted desk cradle for a DJI Osmo Pocket 3 (about 140 × 42 × 34 mm) with a 1/4-20 brass-insert boss underneath and a 16 mm well that the handle drops into.Dyson Gen5detect Fluffy head wall hookA hook that hangs the Gen5detect Fluffy soft roller (about 250 mm wide) next to the dock so the roller is not crushed in a cupboard.HX711 load cell mount plateA pair of plates for a bar load cell (80 × 12.7 × 12.7 mm, 1–20 kg) read by an HX711 board (about 34 × 21 mm).