1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Adapters & couplers
Topeak Ninja Master+ cage adapter
This is not a fixed STL. SpeakCAD generates the topeak ninja master+ cage adapter to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a topeak ninja master+ cage adapter is
An adapter that puts a Ninja Master+ CO2/tool pouch on a bottle-cage boss pair when the official mount does not fit a sloping tube. The plate is 70 × 22 × 8 mm with two 5 mm holes on 64 mm centres. Print in PETG with 2 mm walls.
A zip-tie mount spins. In SpeakCAD you set boss spacing, preview the adapter in the browser at no cost, then download the STL.
Example prompt
Design a Ninja Master+ cage adapter 70×22×8 mm, two 5 mm holes on 64 mm centres, 2 mm PETG.
People also search
ninja master plus adapter stltopeak ninja cage mount 3d printninja master bottle bosstopeak ninja adapter 3d model
Questions people ask about a topeak ninja master+ cage adapter
An adapter that puts a Ninja Master+ CO2/tool pouch on a bottle-cage boss pair when the official mount does not fit a sloping tube. The plate is 70 × 22 × 8 mm with two 5 mm holes on 64 mm centres. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Ninja Master+ cage adapter 70×22×8 mm, two 5 mm holes on 64 mm centres, 2 mm PETG.
A zip-tie mount spins. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
GoPro Hero 13 Media Mod cold-shoe barA dual cold-shoe bar that bolts onto a GoPro Hero 13 Media Mod (about 80 mm wide) so a wireless mic and a light sit on the same axis.GoPro Hero 13 bite-mount spacerA 8 mm spacer that moves a Hero 13 off a bite mount so the Media Mod does not hit your chin.Broom handle thread adapter for a mismatched headA short adapter that lets a threaded broom or mop head screw onto a handle with a different thread, saving a perfectly good pole when the head is replaced.Rokform RokLock to MagSafe ring adapter discA disc that twists into a Rokform RokLock mount and presents a MagSafe magnet ring on its face, so an iPhone 16 or any MagSafe phone without a Rokform case c…Hydro Flask 21 oz bottle cage holder for bikeA cage that holds an insulated Hydro Flask 21 oz or 24 oz standard mouth bottle (73 mm diameter) on a bike, keeping coffee hot or water cold on a commute or…Bosch GKS 190 circular saw dust port adapter 35 mmAn adapter that clips onto the chip ejection chute of a Bosch GKS 190 or GKS 18V-57 circular saw and gives it a 35 mm round spigot for a workshop vacuum hose.