1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Adapters & couplers
Peak Design Bike Mount to GoPro adapter
This is not a fixed STL. SpeakCAD generates the peak design bike mount to gopro adapter to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a peak design bike mount to gopro adapter is
An adapter that puts a GoPro 3-prong under a Peak Design Bike Mount so a light and a phone share the bar. Print in PETG.
Two clamps on a stem is ugly. In SpeakCAD you confirm SlimLink vs Universal, preview the adapter in the browser at no cost, then download the STL.
Example prompt
Design a Peak Design Bike to GoPro 3-prong adapter, 14 mm pitch, 5 mm pin hole, 2.4 mm PETG.
People also search
peak design gopro adapter stlpd bike mount gopro 3d printpeak design light adapterpd bike 3 prong 3d model
Questions people ask about a peak design bike mount to gopro adapter
An adapter that puts a GoPro 3-prong under a Peak Design Bike Mount so a light and a phone share the bar. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Peak Design Bike to GoPro 3-prong adapter, 14 mm pitch, 5 mm pin hole, 2.4 mm PETG.
Two clamps on a stem is ugly. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
Dust extraction adapter, 35 mm tool port to 58 mm hoseA tapered adapter that connects the small 35 mm dust port on a sander or router to the 58 mm hose of a shop vacuum, so chips end up in the bin instead of on…Quad Lock to 1/4-20 tripod adapter plateA disc that screws onto any tripod, gimbal or selfie stick with a standard 1/4-20 thread and carries a Quad Lock style twist recess, so a phone in a Quad Loc…Wahoo ELEMNT Roam adapter for Garmin quarter-turn mountsA Wahoo ELEMNT Roam or Bolt will physically lock into a Garmin quarter-turn mount, but Wahoo's tabs are rotated 90 degrees so the screen ends up sideways.Shop-Vac 2.5 inch hose to 35 mm tool dust adapterA stepped reducer that joins a Shop-Vac, Craftsman or Ridgid 2.5 inch (63.5 mm OD) hose end to the 35 mm dust port found on most European sanders and track s…Rode Wireless GO II receiver cold shoe cradleA cradle that fixes a Rode Wireless GO II receiver, which is 44 x 45.3 x 18.5 mm, onto the hot shoe of a Sony A7 IV, Canon EOS R6 or Fujifilm X-T5 without re…Wahoo ELEMNT ACE to Garmin quarter-turn adapterAn adapter that puts an ELEMNT ACE on a Garmin quarter-turn mount, 4 mm thick with the ACE 4-hole pattern on top.