1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Adapters & couplers
Peak Design Capture v3 to Arca adapter
This is not a fixed STL. SpeakCAD generates the peak design capture v3 to arca adapter to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a peak design capture v3 to arca adapter is
An adapter that puts Capture v3 on an Arca rail, 38 mm dovetail and the official Capture hole. Print in PETG with an M5.
You should not unscrew the plate every time. In SpeakCAD you confirm v3 vs v2, preview the adapter in the browser at no cost, then download the STL.
Example prompt
Design a Capture v3 to Arca adapter, 38 mm dovetail, official Capture hole, M5, 2.4 mm PETG.
People also search
capture v3 arca stlpeak design capture arca 3d printcapture v3 dovetailpd capture arca plate 3d model
Questions people ask about a peak design capture v3 to arca adapter
An adapter that puts Capture v3 on an Arca rail, 38 mm dovetail and the official Capture hole. Print in PETG with an M5.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Capture v3 to Arca adapter, 38 mm dovetail, official Capture hole, M5, 2.4 mm PETG.
You should not unscrew the plate every time. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
Makita SP6000 track saw dust port adapter 36 mmA swivel adapter for the Makita SP6000 and DSP600 18V LXT track saws that converts the saw's oval-ish 28 mm dust chute to a round 36 mm spigot for a Festool…Sony A7 IV Arca-Swiss plate with anti-twist lipA camera-specific Arca-Swiss plate for the Sony A7 IV, A7R V and A7C II that cannot rotate on the 1/4-20 tripod socket because a 4 mm lip hooks the rear edge…Peak Design Bike Mount to GoPro adapterAn adapter that puts a GoPro 3-prong under a Peak Design Bike Mount so a light and a phone share the bar.Vacuum hose adapter, 32 mm to 35 mmA stepped sleeve that joins a 32 mm vacuum hose end to a 35 mm attachment, one of the most common mismatches between cleaner brands.Speaker stand pole adapter, 35 mm socketA cup that fits over a 35 mm speaker stand pole and provides a flat top with screw holes for a monitor speaker or small light that lacks a pole socket.Lezyne bike light mount to GoPro adapterLezyne Macro Drive, Lite Drive and Micro Drive lights slide onto a small rail on their strap bracket.