1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Adapters & couplers
Sony ZV-E10 II cage with Arca plate
This is not a fixed STL. SpeakCAD generates the sony zv-e10 ii cage with arca plate to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a sony zv-e10 ii cage with arca plate is
A three-sided cage for a Sony ZV-E10 II (about 121 × 68 × 54 mm body) with a 38 mm Arca-Swiss dovetail on the base, a cold shoe on top, and cutouts for the flip screen, HDMI and USB-C. Side rails are 8 mm thick with 1/4-20 holes on 20 mm centres. Print the base and sides as three PETG parts that screw together with M3 heat-set inserts.
A ZV-E10 cage covers the Mark II's new movie-record button. In SpeakCAD you list the ports you need open, preview the cage in the browser without paying, then download the STL.
Example prompt
Model a ZV-E10 II cage for a 121×68×54 mm body, 38 mm Arca dovetail, top cold shoe, HDMI and USB-C cutouts, 8 mm side rails with 1/4-20 holes, three PETG parts with M3 inserts.
People also search
sony zv-e10 ii cage stlzv-e10 ii arca plate 3d printsony zv-e10 mark ii cagezv-e10 ii camera cage 3d model
Questions people ask about a sony zv-e10 ii cage with arca plate
A three-sided cage for a Sony ZV-E10 II (about 121 × 68 × 54 mm body) with a 38 mm Arca-Swiss dovetail on the base, a cold shoe on top, and cutouts for the flip screen, HDMI and USB-C. Side rails are 8 mm thick with 1/4-20 holes on 20 mm centres. Print the base and sides as three PETG parts that screw together with M3 heat-set inserts.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a ZV-E10 II cage for a 121×68×54 mm body, 38 mm Arca dovetail, top cold shoe, HDMI and USB-C cutouts, 8 mm side rails with 1/4-20 holes, three PETG parts with M3 inserts.
A ZV-E10 cage covers the Mark II's new movie-record button. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
Broom handle thread adapter for a mismatched headA short adapter that lets a threaded broom or mop head screw onto a handle with a different thread, saving a perfectly good pole when the head is replaced.Rokform RokLock to MagSafe ring adapter discA disc that twists into a Rokform RokLock mount and presents a MagSafe magnet ring on its face, so an iPhone 16 or any MagSafe phone without a Rokform case c…Hydro Flask 21 oz bottle cage holder for bikeA cage that holds an insulated Hydro Flask 21 oz or 24 oz standard mouth bottle (73 mm diameter) on a bike, keeping coffee hot or water cold on a commute or…Bosch GKS 190 circular saw dust port adapter 35 mmAn adapter that clips onto the chip ejection chute of a Bosch GKS 190 or GKS 18V-57 circular saw and gives it a 35 mm round spigot for a workshop vacuum hose.Canon EOS R6 hot shoe dual cold shoe barA T-shaped bar that slides into the hot shoe of a Canon EOS R6, R6 Mark II or R50 and offers two cold shoes side by side, so a Rode VideoMic GO II and a smal…Peak Design Travel Tripod phone clampA clamp that puts a 70–85 mm phone on a Travel Tripod's cold shoe, 12 mm shoe and a 1/4-20 backup.