Adapters & couplers

Microphone stand thread adapter, 3/8 to 5/8 inch

A threaded bushing that lets a European 3/8 inch microphone stand accept a US 5/8 inch 27 TPI clip or shock mount. The part has an external 5/8-27 thread about 12 mm long, an internal 3/8-16 thread through a 15 mm body and a 22 mm knurled flange for finger tightening. Printed threads work well at this pitch when modelled with 0.15 mm radial clearance and a small lead-in chamfer; printing the adapter standing on its flange keeps the thread profile clean and strong.

SpeakCAD models both threads to the exact standard and clearance you request, so you are not relying on a file drawn for a different printer's tolerances. Preview free in your browser, then ask for a 1/4 inch variant or a longer flange if the first fit is not to your liking.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Create a thread adapter bushing: external 5/8 inch 27 TPI thread 12 mm long with 0.15 mm clearance and a 0.5 mm lead-in chamfer, internal 3/8 inch 16 TPI thread through a 15 mm long body. Knurled flange 22 mm diameter, 4 mm thick between the two sections.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More adapters & couplers

Quad Lock to 1/4-20 tripod adapter plateA disc that screws onto any tripod, gimbal or selfie stick with a standard 1/4-20 thread and carries a Quad Lock style twist recess, so a phone in a Quad Loc…Lezyne bike light mount to GoPro adapterLezyne Macro Drive, Lite Drive and Micro Drive lights slide onto a small rail on their strap bracket.Raspberry Pi 5 VESA 100 mount adapter plateA plate that hangs a Raspberry Pi 5 on the back of a monitor using the 100 x 100 mm VESA holes, turning a screen into a compact desktop or kiosk.Bosch GKS 190 circular saw dust port adapter 35 mmAn adapter that clips onto the chip ejection chute of a Bosch GKS 190 or GKS 18V-57 circular saw and gives it a 35 mm round spigot for a workshop vacuum hose.Rode Wireless GO II receiver cold shoe cradleA cradle that fixes a Rode Wireless GO II receiver, which is 44 x 45.3 x 18.5 mm, onto the hot shoe of a Sony A7 IV, Canon EOS R6 or Fujifilm X-T5 without re…PVC pipe adapter, 40 mm to 50 mmA reducing coupler that connects a 40 mm PVC pipe to a 50 mm pipe for low-pressure drains, dust collection or a garden gravity feed.

Make your microphone stand thread adapter, 3/8 to 5/8 inch now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.