Bugaboo Fox stroller cup holder adapter clamp
A clamp that fixes a cup holder to the handlebar or frame of a Bugaboo Fox, Cameleon or Bee so a coffee and a water bottle ride along without dangling from a strap. The Fox handlebar is an oval around 30 by 25 mm, so the clamp has a 30.5 by 25.5 mm bore with a 1 mm foam recess and an M5 bolt, and a 75 mm cup with a 2 mm drain hole and 1.6 mm walls sits on a 20 mm arm that pivots so the cup stays level when the bar tilts. Total height is 90 mm. Print the clamp halves flat and the cup upright in PETG for outdoor use.
Stroller bars vary between Bugaboo, Cybex, Uppababy and Babyzen, so a clamp generated to your measured bar grips without marking the foam. In SpeakCAD you give the bar dimensions and cup size, preview the adapter in the browser at no cost, add a phone slot in the chat and download the STL.
Design a stroller cup holder with a two-half clamp having a 30.5 x 25.5 mm oval bore, 4 mm walls, a 1 mm foam recess and an M5 bolt for a Bugaboo Fox handlebar, a 20 mm pivot arm on a 6 mm pin and a 75 mm cup 90 mm tall with a 2 mm drain hole.