1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Adapters & couplers
Peak Design Travel Tripod phone clamp
This is not a fixed STL. SpeakCAD generates the peak design travel tripod phone clamp to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a peak design travel tripod phone clamp is
A clamp that puts a 70–85 mm phone on a Travel Tripod's cold shoe, 12 mm shoe and a 1/4-20 backup. Print in PETG.
The official phone mount is a separate buy. Describe the phone in SpeakCAD, preview the clamp in the browser for free, then download the STL.
Example prompt
Create a Travel Tripod phone clamp, 12 mm cold shoe, 70–85 mm phone, 1/4-20 boss, 2 mm PETG.
People also search
peak design tripod phone stltravel tripod phone clamp 3d printpd tripod phone holderpeak design phone mount 3d model
Questions people ask about a peak design travel tripod phone clamp
A clamp that puts a 70–85 mm phone on a Travel Tripod's cold shoe, 12 mm shoe and a 1/4-20 backup. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Travel Tripod phone clamp, 12 mm cold shoe, 70–85 mm phone, 1/4-20 boss, 2 mm PETG.
The official phone mount is a separate buy. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
Insta360 X3 to GoPro finger mount adapterThe Insta360 X3 and X4 use a 1/4-20 tripod thread on the base, while bike, helmet and chest mounts use the GoPro three-finger interface.Festool CT 27 mm hose to 32 mm adapterA short adapter that lets the 27 mm anti-static hose from a Festool CT 26, CT 36 or CTL MIDI plug into 32 mm dust ports on non-Festool tools such as Makita s…Peak Design Capture clip backing plate for thin strapsA spacer plate that sits behind a Peak Design Capture V3 clip so it clamps firmly onto thin backpack straps, seatbelt-style webbing or a 20 mm MOLLE row that…Quad Lock Pro 22.2 mm handlebar spacerA 4 mm spacer that lets a Quad Lock Pro clamp sit on a 22.2 mm bar without crushing the sleeve.VESA adapter plate, 75 mm to 100 mmA flat plate that lets a monitor with a 75 x 75 mm VESA pattern hang on an arm or wall mount built for 100 x 100 mm.Rigid shaft coupler, 5 mm to 8 mmA rigid coupling that joins a 5 mm motor shaft to an 8 mm lead screw or output shaft in low-torque projects such as small linear stages or slow turntables.