1
Brackets & mounts
Tesla Model Y Juniper screen-edge phone holder
This is not a fixed STL. SpeakCAD generates the tesla model y juniper screen-edge phone holder to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Tesla Model Y Juniper screen-edge phone holder, 18-30 mm clamp with M4 thumbscrew, cradle for 70-80 mm phones, 12 mm lips, 14 mm cable gap, ASA.
What a tesla model y juniper screen-edge phone holder is
A spring-free phone holder that clamps to the right edge of the 15.4 inch screen in a 2025 Model Y Juniper and carries a cradle for phones 70 to 80 mm wide. The screen clamp opens 18 to 30 mm and closes with an M4 thumbscrew on a TPU pad, the cradle has 12 mm side lips and a 14 mm bottom opening for a USB-C cable, and the arm tilts 10 degrees toward the driver. Print in ASA or PETG, not PLA, because the car cabin gets hot.
The earlier Model Y uses the same screen size but a different housing depth, so measure before printing. Open the ready-made holder in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
tesla model y juniper phone mountmodel y 2025 screen phone holderjuniper phone mount stltesla model y phone holder 3d print
Questions people ask about a tesla model y juniper screen-edge phone holder
A spring-free phone holder that clamps to the right edge of the 15.4 inch screen in a 2025 Model Y Juniper and carries a cradle for phones 70 to 80 mm wide. The screen clamp opens 18 to 30 mm and closes with an M4 thumbscrew on a TPU pad, the cradle has 12 mm side lips and a 14 mm bottom opening for a USB-C cable, and the arm tilts 10 degrees toward the driver. Print in ASA or PETG, not PLA, because the car cabin gets hot.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Tesla Model Y Juniper screen-edge phone holder, 18-30 mm clamp with M4 thumbscrew, cradle for 70-80 mm phones, 12 mm lips, 14 mm cable gap, ASA.
The earlier Model Y uses the same screen size but a different housing depth, so measure before printing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Kärcher K4 pressure washer nozzle holder wall bracketA wall bracket that parks the Vario Power lance, Dirt Blaster nozzle and foam cannon of a Kärcher K4 or K5 pressure washer so they stop rolling around the ga…Home Assistant Green wall mountA wall mount that holds a Home Assistant Green with a 14 mm Ethernet cutout and two 4.5 mm holes.M5Stack AtomS3 Lite mountA mount that holds an M5Stack AtomS3 Lite (24 × 24 × about 10 mm) on a wall, desk or 2020 extrusion.Tesla Wall Connector Gen 3 cable coil hangerA wall saddle for the 7.3 m cable of a Tesla Wall Connector Gen 3 (the unit is about 380 × 155 × 110 mm), mounted beside it so the cable coils in loose loops…Xbox Series X under desk mountAn under-desk mount for an Xbox Series X lying on its side (301 × 151 × 151 mm).Quad Lock wall mount plate for shower or workshopA flat plate with a Quad Lock style twist-lock recess so any phone in a Quad Lock case snaps onto a shower wall, a workshop board or the side of a fridge.