1
Organizers & storage
Tesla Model 3 Highland wireless charger phone divider
This is not a fixed STL. SpeakCAD generates the tesla model 3 highland wireless charger phone divider to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Tesla Model 3 Highland wireless charger divider, 3 mm fin 45 mm tall on a 30 mm foot, 1 mm grippy base, no metal, PETG.
What a tesla model 3 highland wireless charger phone divider is
A thin divider that sits between the two phone bays on the Model 3 Highland wireless charging pad so two phones stay on their coils instead of sliding together. The fin is 3 mm thick and 45 mm tall on a 30 mm wide foot, with a 1 mm TPU base that grips the rubber mat without adhesive and no metal anywhere near the coils. Print in PETG, flat on its side, or in TPU for a softer part.
The Juniper Model Y pad has a different length, so resize the foot before printing for that car. Open the ready-made divider in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
tesla model 3 highland wireless charger dividermodel 3 phone charger separator stltesla wireless charging pad dividermodel 3 highland phone tray insert
Questions people ask about a tesla model 3 highland wireless charger phone divider
A thin divider that sits between the two phone bays on the Model 3 Highland wireless charging pad so two phones stay on their coils instead of sliding together. The fin is 3 mm thick and 45 mm tall on a 30 mm wide foot, with a 1 mm TPU base that grips the rubber mat without adhesive and no metal anywhere near the coils. Print in PETG, flat on its side, or in TPU for a softer part.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Tesla Model 3 Highland wireless charger divider, 3 mm fin 45 mm tall on a 30 mm foot, 1 mm grippy base, no metal, PETG.
The Juniper Model Y pad has a different length, so resize the foot before printing for that car. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Weekly pill organizer with hinged lidsSeven compartments, one per day, each with its own print-in-place hinged lid that snaps shut with a small catch.Dremel accessory organizer tray for 3.2 mm shank bitsA desk tray that stands 40 Dremel accessories upright by their 3.2 mm (1/8 inch) shanks so the cutting ends face you: grinding stones, cut-off wheel mandrels…Festool Systainer3 M 187 oscillator insertA two-part insert for a Systainer3 M 187 that holds a Vecturo or OSC 18, five blades in 2 mm slots, and the charger.IKEA SKÅDIS 6 mm cable-hook pairA pair of SKÅDIS hooks that park 6 mm USB-C or IEC cables in a 8 mm saddle so they do not knot behind the board.Creality Ender-3 V3 SE tool drawerA slim drawer that hangs under the base of an Ender-3 V3 SE on the front 2040 extrusion, for nozzles, the hex keys and the cleaning needle.French cleat rack for three compact impact driversA French cleat shelf for three 18 V compact impact drivers such as the DeWalt DCF887, Makita DTD153 or Milwaukee M18 FID.