Brackets & mounts

Tesla Model 3 Highland screen-side MagSafe mount

A clip-on bracket that hooks over the left edge of the 15.4 inch centre screen in a Model 3 Highland and holds a MagSafe puck (about 56 mm across, 5.5 mm thick) beside the display, so the phone never covers the map. The clamp opens from 18 to 30 mm with a TPU-lined jaw, the puck cup is 57 mm with a 6 mm cable notch, and the arm sets the phone 10 mm off the glass. Print the clamp on its side in PETG or ASA for summer cabin heat. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.
No ready-made model yet: building it uses credits (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime).Updated

No ready-made model for this part yet

Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.
1

Describe

Sign in: the example prompt below is filled in. SpeakCAD builds the part from it with AI, 4 credits for the part on a plan, its first 3 small changes free (Maker: 50 credits a month for $7.99, cancel anytime). Replace any number with what you measured first.
2

Adjust

Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).
3

Print

Download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price.

Example prompt

Design a Tesla Model 3 Highland screen-side MagSafe mount, clamp opening 18 to 30 mm with TPU pad, 57 mm puck cup, 6 mm cable notch, 10 mm offset, PETG.

Build it with AI opens the app with this prompt already typed. Replace any number with what you measured before sending it; the rest of the design stays consistent.

Fit notes

The pre-2024 Model 3 has a similar screen but a thicker back housing, so check the jaw range before printing.

Also searched as: tesla model 3 highland phone mount, model 3 highland screen phone holder stl, tesla screen magsafe mount 3d print, model 3 highland phone mount 3d model.

Questions people ask about a Tesla Model 3 Highland screen-side MagSafe mount

A clip-on bracket that hooks over the left edge of the 15.4 inch centre screen in a Model 3 Highland and holds a MagSafe puck (about 56 mm across, 5.5 mm thick) beside the display, so the phone never covers the map. The clamp opens from 18 to 30 mm with a TPU-lined jaw, the puck cup is 57 mm with a 6 mm cable notch, and the arm sets the phone 10 mm off the glass. Print the clamp on its side in PETG or ASA for summer cabin heat.

There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.

SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.

A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.

Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.

No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.

Build, adjust and print your Tesla Model 3 Highland screen-side MagSafe mount

Nothing to install. The prompt is waiting in the app after you sign in: SpeakCAD builds the part with AI (credits), no CAD skills needed, you check the fit, then download the STL, 3MF or sliced G-code.

Looking for a finished design by a maker? Browse the brackets & mounts on the marketplace, where makers share their models, most of them free.