1
Garden & outdoor
Suet cake feeder cage
This is not a fixed STL. SpeakCAD generates the suet cake feeder cage to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a suet cake cage, 118×118×42 mm inside, 18×18 mm openings with 3 mm bars, hinged lid with snap latch, 6 mm hanging loop, ASA.
What a suet cake feeder cage is
A hanging cage for a standard suet cake, about 114 × 114 × 38 mm. The inner space is 118 × 118 × 42 mm with a lattice of 18 × 18 mm openings for beaks and 3 mm bars, a hinged lid with a snap latch and a 6 mm hanging loop. Print both halves flat in ASA or PETG so it survives sun and frost.
The larger square fat blocks sold in Europe are about 300 g and thicker, so check the depth. The model opens free in SpeakCAD; edit any millimetre in the viewer or the chat, then download the STL.
People also search
suet cake feeder stlsuet cage 3d printbird suet feederfat block bird feeder
Questions people ask about a suet cake feeder cage
A hanging cage for a standard suet cake, about 114 × 114 × 38 mm. The inner space is 118 × 118 × 42 mm with a lattice of 18 × 18 mm openings for beaks and 3 mm bars, a hinged lid with a snap latch and a 6 mm hanging loop. Print both halves flat in ASA or PETG so it survives sun and frost.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a suet cake cage, 118×118×42 mm inside, 18×18 mm openings with 3 mm bars, hinged lid with snap latch, 6 mm hanging loop, ASA.
The larger square fat blocks sold in Europe are about 300 g and thicker, so check the depth. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Drip irrigation tube stakeDrip lines wander out of pots unless pinned, and this stake holds 4 mm micro tubing right at the plant base.Compost aerator tool headA compost heap breaks down faster when air gets into the middle, and this aerator head turns a broom handle into a plunging turner.Bosch Kiox 300 display sun hoodA 40 mm hood that clips onto a Bosch Kiox 300 (about 60 × 45 mm) so the screen stays readable at noon.Hammerhead Karoo 3 out-front mountAn out-front for a Karoo 3 on 31.8 mm bars with the official 4-hole pattern and a 20 mm GoPro boss.Roborock Qrevo Master dock threshold rampA 22 mm ramp that lets a Qrevo Master climb a dock lip or room threshold the stock 20 mm Qrevo ramp does not clear.Figure 8 end closure for 16 mm drip pipeA figure 8 end stop for 16 mm drip irrigation pipe.