Floor pads for a 4080 profile sim rig
Floor pads that bolt under the 40 × 80 mm aluminium profile of a sim rig, so the frame neither scratches a hard floor nor creeps forward under braking. Each pad is an 80 × 40 × 10 mm block with two holes for M8 button head bolts 40 mm apart, matching the two 8 mm slots of the profile, and the heads sit 5 mm below the ridged grip face. Print four in TPU, solid, with the profile side on the bed and without supports. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.No ready-made model for this part yet
Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.Adjust
Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).Example prompt
Design a floor pad that bolts under a 40 × 80 mm aluminium profile with 8 mm slots, so a sim rig does not scratch or slip on a hard floor. Block 80 × 40 × 10 mm with 3 mm corner radii. Two 8.4 mm holes for M8 bolts, 40 mm apart along the 80 mm length and centred, each with a 15 mm counterbore 5 mm deep on the floor side for a button head screw. On the floor side, straight grip ridges 1 mm tall on a 4 mm pitch, running across the 40 mm width. Print in TPU with the profile side on the bed, no supports; a rig needs four.
Fit notes
Rigs differ in what touches the floor. A 40 × 40 base needs a square pad with one bolt, a 40 × 120 or 40 × 160 beam a longer one with three or four, and a thick rug needs taller ridges. Rather than cut down a file made for another frame, give SpeakCAD the profile size, the bolt and the pad height you want.
Questions people ask about floor pads for a 4080 profile sim rig
Floor pads that bolt under the 40 × 80 mm aluminium profile of a sim rig, so the frame neither scratches a hard floor nor creeps forward under braking. Each pad is an 80 × 40 × 10 mm block with two holes for M8 button head bolts 40 mm apart, matching the two 8 mm slots of the profile, and the heads sit 5 mm below the ridged grip face. Print four in TPU, solid, with the profile side on the bed and without supports.
There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.
SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.
A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.