1
Hobby & gaming
Sim rig aluminium profile cable clip
This is not a fixed STL. SpeakCAD generates the sim rig aluminium profile cable clip to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a profile cable clip for an 8 mm slot, 7.8 mm key with 0.6 mm barbs, 12 mm snap loop, 2 mm walls.
What a sim rig aluminium profile cable clip is
A snap-in cable clip for 40 series aluminium profile rigs with an 8 mm slot. The key is 7.8 mm wide with 0.6 mm barbs, so it presses into the slot without a T-nut, and the clip holds a bundle up to 12 mm in a 1 mm snap-shut loop. Print on its side in PETG so the barbs flex, 2 mm walls; a set of 20 fits on one plate.
A 6 mm slot profile needs a narrower key, and 10 mm slot rigs need a wider one. Open the ready-made clip in SpeakCAD without paying, change the slot width in the viewer or the chat, then download the STL.
People also search
sim rig cable clip stl8mm slot cable clip 3d printaluminium profile cable management4040 profile cable clip
Questions people ask about a sim rig aluminium profile cable clip
A snap-in cable clip for 40 series aluminium profile rigs with an 8 mm slot. The key is 7.8 mm wide with 0.6 mm barbs, so it presses into the slot without a T-nut, and the clip holds a bundle up to 12 mm in a 1 mm snap-shut loop. Print on its side in PETG so the barbs flex, 2 mm walls; a set of 20 fits on one plate.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a profile cable clip for an 8 mm slot, 7.8 mm key with 0.6 mm barbs, 12 mm snap loop, 2 mm walls.
A 6 mm slot profile needs a narrower key, and 10 mm slot rigs need a wider one. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Cold shoe mount adapter for cameraA cold shoe adapter lets you bolt a microphone, light or monitor onto a camera cage or tripod that only offers a 1/4 inch thread.Citadel paint pot rack for 26 mm potsA three-tier stepped rack that holds 30 Games Workshop Citadel paint pots, the 12 ml flip-top pots that are about 26 mm across and 32 mm tall, tilted 15 degr…Hot Wheels Premium wall ledge for 10 cardsA 400 mm ledge with a 2 mm slot that holds 10 Premium blister cards at 10 degrees.Apple Vision Pro travel battery pocketA pocket that straps the Vision Pro battery pack (about 70 × 40 × 20 mm) to the official travel case so the cable does not yank the headset in a bag.Meta Quest 3S headset desk standA compact stand for a Meta Quest 3S (191.5 × 102 × 142.5 mm) that rests the headset on a 60 mm wide saddle under the front of the strap, so the lenses face d…Drumstick holder for stand clampA holder that clamps to a drum or cymbal stand and keeps four pairs of sticks upright.