1
Brackets & mounts
SG90 servo bracket
This is not a fixed STL. SpeakCAD generates the sg90 servo bracket to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model an SG90 L bracket, 23×12.6 mm cut-out, two 2 mm pilot holes 28 mm apart, 30×20×3 mm foot with two 3.2 mm holes, 2.4 mm walls.
What a sg90 servo bracket is
An L bracket for an SG90 or MG90S micro servo (22.5 × 12.2 × 22.7 mm body, 32 mm across the tabs). The cut-out is 23 × 12.6 mm with two 2 mm pilot holes about 28 mm apart for the tab screws, and the 30 × 20 × 3 mm foot has two 3.2 mm holes. Walls are 2.4 mm. Print on its side in PETG so the corner is strong.
The MG996R is a standard-size servo about 40 × 20 mm and does not fit. Open the ready-made model in SpeakCAD for free, change the cut-out in the viewer or the chat, then download the STL.
People also search
sg90 bracket stlsg90 servo mount 3d printmicro servo bracketsg90 holder 3d model
Questions people ask about a sg90 servo bracket
An L bracket for an SG90 or MG90S micro servo (22.5 × 12.2 × 22.7 mm body, 32 mm across the tabs). The cut-out is 23 × 12.6 mm with two 2 mm pilot holes about 28 mm apart for the tab screws, and the 30 × 20 × 3 mm foot has two 3.2 mm holes. Walls are 2.4 mm. Print on its side in PETG so the corner is strong.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model an SG90 L bracket, 23×12.6 mm cut-out, two 2 mm pilot holes 28 mm apart, 30×20×3 mm foot with two 3.2 mm holes, 2.4 mm walls.
The MG996R is a standard-size servo about 40 × 20 mm and does not fit. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Google Nest Mini wall hanger with hidden cableA hanger for the Google Nest Mini that uses the screw slot moulded into the back of the speaker.Chuckit ball launcher wall mount with ball holderA garage or hallway mount that holds a Chuckit Classic 26M launcher upright by its handle and keeps two tennis balls ready beside it.Hatch Restore 2 wall shelf with cable slotA 160 mm shelf that holds a Restore 2 and drops the USB-C through a 8 mm slot so the nightstand stays clear.Milwaukee M12 FUEL installation-driver holsterA holster that hangs an M12 FUEL installation driver (about 280 mm long) by the barrel so the offset head stays clear.MikroTik hAP ac lite wall mountA wall cradle for a MikroTik hAP ac lite (113 × 89 × 28 mm) that holds it on edge with the ports facing down, so cables drop straight to the floor.Adjustable support bracket for a sagging graphics cardA telescoping pillar that stands on the PC case floor or power supply shroud and props up the far end of a heavy graphics card so it stops drooping in the PC…