1
Hobby & gaming
Roland SP-404MKII angled stand
This is not a fixed STL. SpeakCAD generates the roland sp-404mkii angled stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a 15° stand for a Roland SP-404MKII, 181 mm wide cradle, 12 mm side rails, 4 mm front lip, open rear, two rails and a crossbar.
What a roland sp-404mkii angled stand is
A stand that tilts a Roland SP-404MKII (about 179 × 312 × 76 mm) 15° towards you so the pads and screen are easier to play. The cradle is 181 mm wide inside with 12 mm side rails and a 4 mm front lip, the rear is open for the jacks, USB-C and SD slot, and it prints as two side rails joined by a 181 mm crossbar. Print in PETG.
Older SP-404 and SP-404SX units have a different shape and jack layout, so measure yours before printing. Open the ready-made model in SpeakCAD for free, change the angle in the viewer or the chat, then download the STL.
People also search
sp-404mkii stand stlsp 404 mk2 stand 3d printroland sp404 standsampler stand 3d print
Questions people ask about a roland sp-404mkii angled stand
A stand that tilts a Roland SP-404MKII (about 179 × 312 × 76 mm) 15° towards you so the pads and screen are easier to play. The cradle is 181 mm wide inside with 12 mm side rails and a 4 mm front lip, the rear is open for the jacks, USB-C and SD slot, and it prints as two side rails joined by a 181 mm crossbar. Print in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a 15° stand for a Roland SP-404MKII, 181 mm wide cradle, 12 mm side rails, 4 mm front lip, open rear, two rails and a crossbar.
Older SP-404 and SP-404SX units have a different shape and jack layout, so measure yours before printing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
ASUS ROG Ally X grip shellA two-part shell that thickens Ally X grips by 8 mm without covering vents or the rear buttons.PS5 detachable disc drive storage sleeveA dust sleeve for the detachable Ultra HD Blu-ray drive sold for the PS5 Slim, Digital Edition and PS5 Pro (the drive is about 185 × 145 × 20 mm, measure you…Three-tier controller desk standA stepped desk stand for three controllers of any brand, with 170 mm wide shelves 60 mm deep that rise 45 mm each, a 10 mm front lip and a rear slot on every…Hexagonal dice vault with lidA dice vault stores a full seven-piece polyhedral set in a compact hex body with a friction-fit or threaded lid.Nintendo Switch game cartridge case for 24 cardsA slim two-part case with a sliding lid that holds 24 Nintendo Switch game cards in a 6 by 4 grid.Hot Wheels wall display rack for carded carsA wall rack for unopened Hot Wheels and Matchbox mainlines still on their blister cards, which measure 108 x 165 mm with the blister sticking out about 35 mm.