1
Brackets & mounts
Raspberry Pi 5 DIN rail mount
This is not a fixed STL. SpeakCAD generates the raspberry pi 5 din rail mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Pi 5 DIN rail mount, 90×60 mm plate, M2.5 standoffs at 58×49 mm, TS35 hook with flexible latch, 2.4 mm PETG.
What a raspberry pi 5 din rail mount is
A DIN rail clip for a Raspberry Pi 5 (85 × 56 mm) running Home Assistant in a fuse box or network cabinet. The plate is 90 × 60 mm with four M2.5 standoffs at 58 × 49 mm, and the back has a 35 mm TS35 rail hook with a flexible latch. Print in PETG, 2.4 mm plate.
The Home Assistant Yellow is a different board with its own clip. Open the ready-made mount in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
raspberry pi 5 din rail stlpi 5 din mount 3d printraspberry pi din rail clippi 5 din rail holder 3d model
Questions people ask about a raspberry pi 5 din rail mount
A DIN rail clip for a Raspberry Pi 5 (85 × 56 mm) running Home Assistant in a fuse box or network cabinet. The plate is 90 × 60 mm with four M2.5 standoffs at 58 × 49 mm, and the back has a 35 mm TS35 rail hook with a flexible latch. Print in PETG, 2.4 mm plate.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Pi 5 DIN rail mount, 90×60 mm plate, M2.5 standoffs at 58×49 mm, TS35 hook with flexible latch, 2.4 mm PETG.
The Home Assistant Yellow is a different board with its own clip. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
TP-Link Deco X55 wall mountA wall shelf for a TP-Link Deco X55 unit (about 110 × 110 × 114 mm) that raises the mesh node off the floor for better coverage.Samsung Galaxy Tab S9 wall mount bracket with charging slotA wall bracket that turns a Samsung Galaxy Tab S9 (254.3 x 165.8 x 5.9 mm) into a smart home panel or family calendar.Philips Hue motion sensor corner mount bracketA wedge that lets the Philips Hue motion sensor sit in the corner of a room, where its field of view covers the whole space.Meta Quest 3 controller wall hooks pairA pair of wall hooks for the Meta Quest 3 and Quest 3S Touch Plus controllers, which have no tracking ring, so a conventional VR hook has nothing to grab.UniFi Express 7 wall shelfA 140 mm shelf that holds a UniFi Express 7 with a 16 mm WAN cutout and two 4.5 mm holes.DeWalt FLEXVOLT battery wall rackA rack that hangs four FLEXVOLT 60V/20V batteries (about 110 × 80 mm) on a stud so they are not mixed with 20V MAX packs.