1
Organizers & storage
Prusa MK4S frame tool holder
This is not a fixed STL. SpeakCAD generates the prusa mk4s frame tool holder to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a tool holder for the Prusa MK4S frame, 6.2 mm clamp slot 25 mm deep, 120×30 mm tray, 2.5, 3 and 4 mm hex holes, 45×15 mm cutter pocket.
What a prusa mk4s frame tool holder is
A tool holder that clips onto the side of the MK4S aluminium frame, which is about 6 mm thick, with slots for the Prusa hex keys, a nozzle wrench, a spatula and flush cutters. It has a 6.2 mm clamp slot 25 mm deep with a small snap bump, a 120 × 30 mm tray, 2.5, 3 and 4 mm hex holes and a 45 × 15 mm cutter pocket. Print in PETG on its back.
The CORE One is fully enclosed and has no exposed frame edge, so this clip is for the MK4, MK4S and MK3.9. Open the ready-made holder in SpeakCAD for free, resize the slots for your tools in the viewer or the chat, then download the STL.
People also search
prusa mk4s tool holder stlmk4 frame tool holderprusa tool holder 3d printmk4s hex key holder
Questions people ask about a prusa mk4s frame tool holder
A tool holder that clips onto the side of the MK4S aluminium frame, which is about 6 mm thick, with slots for the Prusa hex keys, a nozzle wrench, a spatula and flush cutters. It has a 6.2 mm clamp slot 25 mm deep with a small snap bump, a 120 × 30 mm tray, 2.5, 3 and 4 mm hex holes and a 45 × 15 mm cutter pocket. Print in PETG on its back.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a tool holder for the Prusa MK4S frame, 6.2 mm clamp slot 25 mm deep, 120×30 mm tray, 2.5, 3 and 4 mm hex holes, 45×15 mm cutter pocket.
The CORE One is fully enclosed and has no exposed frame edge, so this clip is for the MK4, MK4S and MK3.9. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Raspberry Pi HAT storage rack with labelled slotsA vertical rack that stores Raspberry Pi HATs, pHATs and GPIO expansion boards on their edge so pins are not bent in a drawer.Fujifilm X100VI 49 mm filter and lens cap holderA desk or bag organizer for the small kit that the Fujifilm X100VI and X100V accumulate: the AR-X100 adapter ring, two or three 49 mm filters and the slip-on…Framework 16 input-module trayA tray that stores two Framework 16 input modules (numpad, RGB macropad) in 130 × 70 mm wells.Keychron K2 HE travel-case insertAn insert that keeps a K2 HE (about 315 × 128 × 40 mm) from sliding in a sleeve, with a 317 × 130 mm well and a 20 mm cable trough.Insta360 X4 travel case insertAn insert that turns a small box into a travel case for an Insta360 X4 (46 × 123.6 × 37.6 mm) and its kit.Gridfinity bin for 24 1/4 inch hex bitsA 2 × 1 Gridfinity bin (83.5 × 41.5 mm, 3 units tall) holding 24 standard 1/4 inch hex bits (6.35 mm across flats, 25 mm long).