1
Enclosures & cases
PMS5003 particulate sensor case with airflow path
This is not a fixed STL. SpeakCAD generates the pms5003 particulate sensor case with airflow path to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a PMS5003 case, 51×39×22 mm bay, 2 mm divider separating inlet and outlet, 12×2 mm grille slots, cable exit, 1.6 mm PETG walls.
What a pms5003 particulate sensor case with airflow path is
A case for a Plantower PMS5003 (50 × 38 × 21 mm) that keeps its inlet and outlet on the same face apart, so the fan does not re-breathe its own exhaust. The bay is 51 × 39 × 22 mm, a 2 mm divider runs from the sensor face to the grille, and the inlet and outlet grilles each have 12 × 2 mm slots. Print in PETG with 1.6 mm walls, grille face up.
The PMS7003 is flatter (48 × 37 × 12 mm) and the SDS011 is much bigger, so neither fits this bay. Open the model in SpeakCAD without paying, change any millimetre in the viewer or the chat, then download the STL.
People also search
pms5003 case stlpms5003 enclosure 3d printplantower pms5003 housing airflowpms5003 air quality case 3d model
Questions people ask about a pms5003 particulate sensor case with airflow path
A case for a Plantower PMS5003 (50 × 38 × 21 mm) that keeps its inlet and outlet on the same face apart, so the fan does not re-breathe its own exhaust. The bay is 51 × 39 × 22 mm, a 2 mm divider runs from the sensor face to the grille, and the inlet and outlet grilles each have 12 × 2 mm slots. Print in PETG with 1.6 mm walls, grille face up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a PMS5003 case, 51×39×22 mm bay, 2 mm divider separating inlet and outlet, 12×2 mm grille slots, cable exit, 1.6 mm PETG walls.
The PMS7003 is flatter (48 × 37 × 12 mm) and the SDS011 is much bigger, so neither fits this bay. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
4-channel relay module DIN rail caseA DIN rail case for a 4-channel 5 V relay module (about 75 × 55 mm).Google Coral USB Accelerator holderA vented holder for a Coral USB Accelerator (65 × 30 × 8 mm) running Frigate object detection, which gets hot under load.AirTag wallet card holder slim credit card sizeA credit-card footprint (85.6 x 54 mm) card that holds an Apple AirTag (31.9 mm diameter, 8 mm thick) in a wallet card slot so the wallet can be found in the…Flipper Zero hard shell case with GPIO coverA bumper-style protective shell for the Flipper Zero, whose body is 100 x 40 x 25 mm.Matter Thread border-router case for nRFA vented case for an nRF52840 Thread border-router board with SMA and USB-C cutouts.Raspberry Pi 3B+ caseA two-part case for a Raspberry Pi 3 Model B+ (85 × 56 mm).