1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Peloton Tread+ tablet riser
This is not a fixed STL. SpeakCAD generates the peloton tread+ tablet riser to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a peloton tread+ tablet riser is
A 30 mm riser that lifts a phone or small tablet on a Tread+ console so it sits above the official screen bezel. The well is 160 × 14 mm. Print in PETG with 2 mm walls.
The Guide camera riser is a living-room part. In SpeakCAD you measure the console lip, preview the riser in the browser for free, then download the STL.
Example prompt
Create a Tread+ tablet riser 180×40×30 mm, 160×14 mm well, 2 mm PETG.
People also search
peloton tread plus riser stltread+ tablet holder 3d printpeloton tread plus phone shelftread plus riser 3d model
Questions people ask about a peloton tread+ tablet riser
A 30 mm riser that lifts a phone or small tablet on a Tread+ console so it sits above the official screen bezel. The well is 160 × 14 mm. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Tread+ tablet riser 180×40×30 mm, 160×14 mm well, 2 mm PETG.
The Guide camera riser is a living-room part. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Valve Index headset and controller wall mountA combined wall station for the Valve Index headset and its two Knuckles controllers.Hatch Restore 2 wall shelf with cable slotA 160 mm shelf that holds a Restore 2 and drops the USB-C through a 8 mm slot so the nightstand stays clear.IKEA EKET cabinet anti-tip bracketA bracket that ties an EKET cube (35 × 35 cm) to the wall so a stacked tower cannot tip.Wall hook for coiled extension cordsA deep, wide hook that hangs a coiled extension cord or garden lead on the garage wall without kinking it.reMarkable 2 wall mount holder with Marker slotA wall holder for the reMarkable 2 tablet (187 x 246 x 4.7 mm) that keeps it and its Marker within reach beside a desk or on a kitchen wall for the shopping…Ring Video Doorbell 30 degree wedge mountAn angled spacer that turns a Ring Video Doorbell 2nd gen towards the path when the door sits in a recess.