1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Hobby & gaming
Nintendo Switch 2 Pro Controller stand
This is not a fixed STL. SpeakCAD generates the nintendo switch 2 pro controller stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a nintendo switch 2 pro controller stand is
A stand that parks a Switch 2 Pro Controller (about 160 × 110 × 60 mm) at 20 degrees with a 14 mm USB-C slot so it charges on a shelf. The well is 162 × 62 mm. Print in PLA with 2 mm walls.
The Switch 2 Joy-Con grip stand is a different controller. In SpeakCAD you add a second stand, preview it in the browser at no cost, then download the STL.
Example prompt
Design a Switch 2 Pro Controller stand 180×80×40 mm, 162×62 mm well at 20 degrees, 14 mm USB-C slot, 2 mm walls.
People also search
switch 2 pro stand stlnintendo switch 2 controller holder 3d printswitch 2 pro dockswitch 2 pro stand 3d model
Questions people ask about a nintendo switch 2 pro controller stand
A stand that parks a Switch 2 Pro Controller (about 160 × 110 × 60 mm) at 20 degrees with a 14 mm USB-C slot so it charges on a shelf. The well is 162 × 62 mm. Print in PLA with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Switch 2 Pro Controller stand 180×80×40 mm, 162×62 mm well at 20 degrees, 14 mm USB-C slot, 2 mm walls.
The Switch 2 Joy-Con grip stand is a different controller. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Guitar wall hanger with padded yokeA wall hanger lifts a guitar off the floor and out of the way of feet and vacuum cleaners.LEGO minifigure display shelf for 24 figuresA stepped, wall-hanging shelf with four tiers of six LEGO minifigures each, every figure standing on a pair of real 4.8 mm studs at the 8 mm LEGO pitch so it…Nintendo Switch 2 Joy-Con charging grip standA desk stand that holds a Switch 2 Joy-Con charging grip (about 155 × 110 × 45 mm) upright with the USB-C port at the bottom open.PlayStation 5 Pro vertical-stand feetA pair of 80 × 40 × 12 mm feet that widen a PS5 Pro vertical stand so it does not rock on carpet.Pedaltrain Nano Plus power-supply mountA mount that hangs a 9 V brick under a Nano Plus with two 6 mm zip-tie slots matching the rail.Card deck box with sliding lidA deck box protects sleeved trading cards during transport and stops the stack spilling in a backpack.