1
Hobby & gaming
ROG Ally X desk stand
This is not a fixed STL. SpeakCAD generates the rog ally x desk stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a ROG Ally X desk stand, 200×90 mm base, 60 degree back, 38 mm deep ledge, 30 mm centre cable gap, 3 mm walls.
What a rog ally x desk stand is
A desk stand for the ROG Ally X (280.6 × 111.3 × 24.7 to 36.9 mm) that holds it at 60 degrees with a 38 mm deep ledge sized for the thicker Ally X grips. The ledge has a 30 mm gap under the centre so a USB-C cable can reach the top port from behind, and the 200 × 90 mm base has TPU feet pockets. Print on its side in PETG, 3 mm walls.
A stand drawn for the first ROG Ally leaves the Ally X leaning forward. Open the stand in SpeakCAD for free, adjust the angle in the chat or the viewer, then download the STL.
People also search
rog ally x stand stlrog ally x desk stand 3d printrog ally x holderrog ally x stand 3d model
Questions people ask about a rog ally x desk stand
A desk stand for the ROG Ally X (280.6 × 111.3 × 24.7 to 36.9 mm) that holds it at 60 degrees with a 38 mm deep ledge sized for the thicker Ally X grips. The ledge has a 30 mm gap under the centre so a USB-C cable can reach the top port from behind, and the 200 × 90 mm base has TPU feet pockets. Print on its side in PETG, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a ROG Ally X desk stand, 200×90 mm base, 60 degree back, 38 mm deep ledge, 30 mm centre cable gap, 3 mm walls.
A stand drawn for the first ROG Ally leaves the Ally X leaning forward. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Three-tier controller desk standA stepped desk stand for three controllers of any brand, with 170 mm wide shelves 60 mm deep that rise 45 mm each, a 10 mm front lip and a rear slot on every…Dice tower with catch trayA dice tower randomises rolls and keeps dice from flying off the table, which matters when a game night involves drinks and miniatures.Wall-mounted SD card and battery holderCamera batteries and SD cards pile up fast, and a wall-mounted holder keeps charged batteries and empty cards separate from used ones.Funko Pop shelf riser three tier for boxed figuresA stepped riser that lifts the back rows of boxed Funko Pop figures so all three rows are visible on a normal bookshelf.PlayStation 5 Pro vertical-stand feetA pair of 80 × 40 × 12 mm feet that widen a PS5 Pro vertical stand so it does not rock on carpet.Bose QuietComfort Ultra headphones hookA hook that hangs QC Ultra headphones (about 170 mm across the cups) under a desk so the headband is not on a chair.