1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Enclosures & cases
Nintendo Switch 2 dock dust cover
This is not a fixed STL. SpeakCAD generates the nintendo switch 2 dock dust cover to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a nintendo switch 2 dock dust cover is
A cover that sits on a Switch 2 dock (about 170 × 80 × 60 mm) when the console is undocked so dust is not in the USB-C slot. The cap is 174 × 84 × 12 mm with a 2 mm lip. Print in PLA with 1.2 mm walls.
The OLED dock wall mount is a different generation. In SpeakCAD you confirm dock vs travel, preview the cover in the browser for free, then download the STL.
Example prompt
Create a Switch 2 dock dust cover 174×84×12 mm with a 2 mm lip, 1.2 mm walls.
People also search
switch 2 dock cover stlnintendo switch 2 dust cap 3d printswitch 2 dock lidswitch 2 dock dust cover 3d model
Questions people ask about a nintendo switch 2 dock dust cover
A cover that sits on a Switch 2 dock (about 170 × 80 × 60 mm) when the console is undocked so dust is not in the USB-C slot. The cap is 174 × 84 × 12 mm with a 2 mm lip. Print in PLA with 1.2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Switch 2 dock dust cover 174×84×12 mm with a 2 mm lip, 1.2 mm walls.
The OLED dock wall mount is a different generation. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Raspberry Pi 5 Hailo HAT caseA case that clears a Pi 5 with the Hailo AI HAT, 30 mm extra height, GPIO slot and 40 mm fan vents.Project box for an ESP32 dev board with USB openingA compact housing for a 30-pin ESP32 DevKit board that leaves the USB connector exposed for programming and power while covering the pins.Bezel case for a 0.96 inch OLED moduleA small front bezel and back cover for the popular 0.96 inch I2C OLED module, turning a bare board into a neat readout you can screw to a panel or stand on a…AirTag dog collar holder for 20 mm collarsA screw-closed AirTag holder that slides onto a 20 mm dog collar and sits flat against the neck, so the tag does not dangle, jingle or snag in bushes.Arduino Uno R4 WiFi case with LED matrix windowA protective box for the Arduino Uno R4 WiFi that keeps the 12 x 8 LED matrix visible.Raspberry Pi Camera Module 3 case with tripod threadA compact housing for the Raspberry Pi Camera Module 3, which uses a 25 x 24 mm board with 2.2 mm holes on a 21 x 12.5 mm pattern.