1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Nespresso Vertuo Plus capsule bin for 30 pods
This is not a fixed STL. SpeakCAD generates the nespresso vertuo plus capsule bin for 30 pods to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a nespresso vertuo plus capsule bin for 30 pods is
A bin that sits beside a Vertuo Plus and holds 30 used capsules in a 160 × 120 × 140 mm well with a 4 mm drip lip so coffee does not hit the counter. Print in PETG with 2 mm walls.
The Vertuo Next drip-tray extension is a different machine. Describe Plus vs Next in SpeakCAD, preview the bin in the browser without paying, then download the STL.
Example prompt
Model a Vertuo Plus capsule bin 160×120×140 mm for 30 pods, 4 mm drip lip, 2 mm PETG.
People also search
vertuo plus capsule bin stlnespresso vertuo plus pod holder 3d printvertuo plus used pod binnespresso plus capsule bin 3d model
Questions people ask about a nespresso vertuo plus capsule bin for 30 pods
A bin that sits beside a Vertuo Plus and holds 30 used capsules in a 160 × 120 × 140 mm well with a 4 mm drip lip so coffee does not hit the counter. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Vertuo Plus capsule bin 160×120×140 mm for 30 pods, 4 mm drip lip, 2 mm PETG.
The Vertuo Next drip-tray extension is a different machine. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Gillette Labs exfoliating-bar razor standA stand that holds a Gillette Labs razor by the bar so the blades dry, 20 mm saddle and a 40 mm drip tray.Breville Oracle Jet knock-box linerA liner that drops into the Oracle Jet knock box (about 140 × 90 × 80 mm) so you empty pucks without washing the stainless every shot.Tea bag dispenser box with front slotA countertop box that holds a stack of wrapped tea bags and dispenses one at a time from a slot at the bottom.Textured coaster set with holderA set of four coasters with a matching holder for the coffee table.AeroPress stand with paper filter holder and cap slotA countertop stand that keeps an AeroPress Original or Clear chamber, plunger, filter cap and paper filters together in one spot.Gaggia Classic Pro steam-wand tip clipA clip that parks a Classic Pro steam wand over a 60 mm rinse cup so the tip does not drip on the cup warmer.