1
Replacement parts
Neff TwistPad knob housing
This is not a fixed STL. SpeakCAD generates the neff twistpad knob housing to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Neff TwistPad knob housing, 45 mm diameter 15 mm tall, magnet pocket in the base, ring grip, 1.2 mm raised dot, PETG.
What a neff twistpad knob housing is
A replacement body for the magnetic TwistPad control knob of Neff induction hobs, about 45 mm across and 15 mm tall. The base has a pocket that holds the original magnet from your old knob, and the top has a ring grip and a 1.2 mm raised dot. Print in PETG, flat face down, and glue the magnet back in.
Neff TwistPad Fire and the older knob differ in size, so measure yours before printing. The ready-made housing opens in SpeakCAD at no cost; resize it in the viewer or the chat, then save the STL.
People also search
neff twistpad knob replacementneff magnetic hob knobneff twist pad 3d printneff induction knob stl
Questions people ask about a neff twistpad knob housing
A replacement body for the magnetic TwistPad control knob of Neff induction hobs, about 45 mm across and 15 mm tall. The base has a pocket that holds the original magnet from your old knob, and the top has a ring grip and a 1.2 mm raised dot. Print in PETG, flat face down, and glue the magnet back in.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Neff TwistPad knob housing, 45 mm diameter 15 mm tall, magnet pocket in the base, ring grip, 1.2 mm raised dot, PETG.
Neff TwistPad Fire and the older knob differ in size, so measure yours before printing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Yeti Rambler MagSlider lid slider replacementThe magnetic slider on a Yeti Rambler 20 oz or 30 oz tumbler lid is the part that goes through the dishwasher, gets lost, and costs almost as much as a new lid.Nanoleaf Shapes 10 mm corner spacerA 10 mm spacer that sits behind a Shapes panel so a corner that is out of plane still clicks.IKEA SMÅSTAD bin-lid soft bumpA bump that sits under a SMÅSTAD bench-bin lid so it does not slam on little fingers.Anycubic Kobra S1 riser feetRiser feet that lift a Kobra S1 25 mm so its bottom vents breathe and the ACE Pro cable can run under it.Samsung washing machine softener siphon capA replacement siphon cap for the fabric softener compartment of Samsung front-loader detergent drawers, the small cap that goes missing and makes softener po…Bosch Purion display rain coverA snap-on cover for a Bosch Purion e-bike display that keeps rain and parking-lot knocks off the screen and buttons.