1
Desk & office
Monitor light bar clip extender for thick monitors
This is not a fixed STL. SpeakCAD generates the monitor light bar clip extender for thick monitors to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a monitor light bar extender, 60 mm wide 4 mm thick bridge spanning a 60 mm deep monitor top, front lip for the clamp, rear foot.
What a monitor light bar clip extender for thick monitors is
An extender for weighted monitor light bars (the BenQ ScreenBar and Xiaomi style clips) that only open to about 30 mm, so they can sit on thicker or curved monitors up to 60 mm deep. The adapter is a 60 mm wide flat bridge, 4 mm thick, with a front lip that the light bar clamps onto and a rear foot that rests on the monitor back. Print in PETG flat.
Light bars that use a magnetic mount plate do not need it. Open the ready-made extender in SpeakCAD for free, set your monitor thickness in the viewer or the chat, then download the STL.
People also search
monitor light bar adapter stlscreenbar thick monitor adapter 3d printlight bar curved monitor clipmonitor lamp clamp extender
Questions people ask about a monitor light bar clip extender for thick monitors
An extender for weighted monitor light bars (the BenQ ScreenBar and Xiaomi style clips) that only open to about 30 mm, so they can sit on thicker or curved monitors up to 60 mm deep. The adapter is a 60 mm wide flat bridge, 4 mm thick, with a front lip that the light bar clamps onto and a rear foot that rests on the monitor back. Print in PETG flat.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a monitor light bar extender, 60 mm wide 4 mm thick bridge spanning a 60 mm deep monitor top, front lip for the clamp, rear foot.
Light bars that use a magnetic mount plate do not need it. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Two-piece tablet stand with adjustable angleA cradle and a folding prop that together hold a tablet at 30, 45 or 60 degrees.Novation Launchpad X angled desk standAn angled stand that tilts a Novation Launchpad X, Launchpad Mini MK3 or Launchpad Pro MK3 towards you at 20 degrees so the RGB pad grid is readable standing…COROS Vertix 2S charger dockA dock that holds a Vertix 2S on its clip at 20 degrees, 54 mm nest.Magic Keyboard Folio iPad 11 riserA 30 mm riser that lifts an 11-inch iPad in its Magic Keyboard Folio so a USB-C hub fits underneath.Dyson OnTrac charging-case standA stand that parks a Dyson OnTrac charging case (about 80 × 70 × 40 mm) at 20 degrees so the earbuds face up on a nightstand.Samsung Odyssey G9 cable combA comb that sits on the Odyssey G9 stand and separates DisplayPort, HDMI and power so they follow the arm.