1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Milwaukee Packout Compact driver-bit caddy
This is not a fixed STL. SpeakCAD generates the milwaukee packout compact driver-bit caddy to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a milwaukee packout compact driver-bit caddy is
A caddy that drops into a Packout Compact Organizer and holds 30 impact bits on 7 mm rails so they do not rattle in the official foam. The plate is 190 × 120 × 18 mm with 7 mm slots on 10 mm centres. Print flat in PETG with 1.6 mm walls.
The existing Compact bit rails are a different layout. In SpeakCAD you set bit count, preview the caddy in the browser at no cost, then download the STL.
Example prompt
Design a Packout Compact driver-bit caddy 190×120×18 mm, 7 mm rails on 10 mm centres for 30 bits, 1.6 mm PETG.
People also search
packout bit caddy stlmilwaukee compact organizer bits 3d printpackout driver bit traymilwaukee packout bit caddy 3d model
Questions people ask about a milwaukee packout compact driver-bit caddy
A caddy that drops into a Packout Compact Organizer and holds 30 impact bits on 7 mm rails so they do not rattle in the official foam. The plate is 190 × 120 × 18 mm with 7 mm slots on 10 mm centres. Print flat in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Packout Compact driver-bit caddy 190×120×18 mm, 7 mm rails on 10 mm centres for 30 bits, 1.6 mm PETG.
The existing Compact bit rails are a different layout. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Ergonomic sanding block for hook-and-loop discsThis hand sanding block accepts the same 125 mm hook-and-loop discs you use on a random orbit sander, so leftover discs get a second life on edges and profiles.Bladed spoke holder tool for wheel truingAero spokes such as Sapim CX-Ray (2.2 x 0.9 mm) and DT Aerolite twist when you turn the nipple, so a holder is essential during wheel building and truing.Fairphone 5 modular repair standA bench stand that holds a Fairphone 5 (about 162 × 76 × 9.6 mm) face-down at 20 degrees so you can swap the battery, cameras or USB-C port without the phone…Drill-press vice jaw pads 100 mmA pair of 100 × 25 × 8 mm jaw pads with a 4 mm V-groove for round stock and 2 mm through-holes matching a typical 100 mm drill-press vice.Shop-vac wide floor nozzle 300 mmA 300 mm floor nozzle for a 35 mm shop-vac cuff with a 2 mm mouth and 8 mm wheels on 4 mm pins.Makita MAKPAC Type 1 bit caddyA caddy that fills a MAKPAC Type 1 (about 395 × 295 × 70 mm) with 40 impact bits on 7 mm rails.