1
Hobby & gaming
Meta Quest Touch Plus controller desk stand
This is not a fixed STL. SpeakCAD generates the meta quest touch plus controller desk stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Touch Plus controller stand, 140×70×10 mm base, two 44 mm grip holes 55 mm deep, 70 mm apart, 3 mm walls.
What a meta quest touch plus controller desk stand is
A desk stand for a pair of Meta Quest Touch Plus controllers (the ones sold with Quest 3 and 3S, about 42 mm across the grip) that holds them grip-down, 70 mm apart, so the buttons stay visible and the AA battery door is easy to reach. Grip holes are 44 mm wide and 55 mm deep on a 140 × 70 × 10 mm base. Print upright in PLA, 3 mm walls.
Quest 2 controllers have tracking rings and need much wider spacing. Open the ready-made stand in SpeakCAD for free, change the spacing in the viewer or the chat, then download the STL.
People also search
quest touch plus stand stlquest 3 controller stand 3d printtouch plus controller holderquest 3s controller stand
Questions people ask about a meta quest touch plus controller desk stand
A desk stand for a pair of Meta Quest Touch Plus controllers (the ones sold with Quest 3 and 3S, about 42 mm across the grip) that holds them grip-down, 70 mm apart, so the buttons stay visible and the AA battery door is easy to reach. Grip holes are 44 mm wide and 55 mm deep on a 140 × 70 × 10 mm base. Print upright in PLA, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Touch Plus controller stand, 140×70×10 mm base, two 44 mm grip holes 55 mm deep, 70 mm apart, 3 mm walls.
Quest 2 controllers have tracking rings and need much wider spacing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Roland SP-404MKII angled standA stand that tilts a Roland SP-404MKII (about 179 × 312 × 76 mm) 15° towards you so the pads and screen are easier to play.Guitar wall hanger with padded yokeA wall hanger lifts a guitar off the floor and out of the way of feet and vacuum cleaners.Pokémon TCG toploader wall display rackA wall rack that shows twelve Pokémon TCG cards in standard 3 x 4 inch toploaders (76 x 102 mm, about 2 mm thick for a 35 pt sleeve) in three rows of four.DJI Neo 2 pocket launch padA 120 mm pad that gives a Neo 2 a clean launch off gravel with 8 mm lips.Leica Q3 thumb grip with Arca footA thumb grip that bolts to a Q3 (about 130 × 80 × 93 mm) with an Arca-swiss foot so the camera sits on a travel tripod without a separate plate.Xbox Series S vertical stand with cable channelA vertical stand for an Xbox Series S (275 × 151 × 63.5 mm) with a 65.5 mm wide cradle, 20 mm deep, that sits the console on its long edge with the black ven…