1
Hobby & gaming
Meta Quest Link cable head strap clip
This is not a fixed STL. SpeakCAD generates the meta quest link cable head strap clip to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Quest Link cable clip, 30 mm wide strap loop, 5 mm C-clip with 1 mm snap for a 4–6 mm cable, print in TPU.
What a meta quest link cable head strap clip is
A clip that keeps a Quest Link or USB-C PCVR cable (4 to 6 mm thick) tight against the head strap so the plug is not pulled sideways out of the headset. The 30 mm wide strap loop fits the soft strap and most elite straps, and a 5 mm C-clip holds the cable with a 1 mm snap. Print flat in TPU 95A, or PETG for a stiffer clip.
Fibre-optic link cables are thinner, about 3 mm, so shrink the clip for those. Open the ready-made clip in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
quest link cable clip stlquest 3 cable strap clip 3d printvr cable clip head strapquest link cable holder
Questions people ask about a meta quest link cable head strap clip
A clip that keeps a Quest Link or USB-C PCVR cable (4 to 6 mm thick) tight against the head strap so the plug is not pulled sideways out of the headset. The 30 mm wide strap loop fits the soft strap and most elite straps, and a 5 mm C-clip holds the cable with a 1 mm snap. Print flat in TPU 95A, or PETG for a stiffer clip.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Quest Link cable clip, 30 mm wide strap loop, 5 mm C-clip with 1 mm snap for a 4–6 mm cable, print in TPU.
Fibre-optic link cables are thinner, about 3 mm, so shrink the clip for those. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
PS5 DualSense dual controller charging standA twin-bay stand for two PlayStation 5 DualSense or DualSense Edge controllers (160 x 66 x 106 mm) that holds them face-out with their USB-C ports aligned ov…Meta Quest 3S Elite strap wall dockA wall dock that holds a Quest 3S with the Elite battery strap hanging on a 40 mm hook and the headset sitting in a 180 mm wide cradle.AYANEO KUN travel standA folding stand that holds an AYANEO KUN at 50 degrees with a 14 mm USB-C slot, two pieces on a 6 mm pin.DualSense single wall hook with cable slotA single hook that holds one DualSense (160 × 66 × 106 mm) face out with its USB-C cable plugged in.Sim rig aluminium profile cable clipA snap-in cable clip for 40 series aluminium profile rigs with an 8 mm slot.Magnetic miniature movement trayA movement tray lets you slide a whole unit of miniatures across the board in one motion.