1
Hobby & gaming
Meta Quest 3S headset desk stand
This is not a fixed STL. SpeakCAD generates the meta quest 3s headset desk stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Quest 3S stand, 120×120 mm base with weight pocket, 160 mm column, 60 mm saddle, 70 mm lens recess, 3 mm walls.
What a meta quest 3s headset desk stand is
A compact stand for a Meta Quest 3S (191.5 × 102 × 142.5 mm) that rests the headset on a 60 mm wide saddle under the front of the strap, so the lenses face down into a 70 mm recess and stay out of the sun. The column is 160 mm tall on a 120 × 120 mm base with a weight pocket for coins. Print in PETG upright, 3 mm walls.
The Quest 3 is taller at the front and rests higher on the saddle. Open the stand in SpeakCAD at no cost, edit it in the chat or the viewer, then download the STL.
People also search
quest 3s stand stlmeta quest 3s holder 3d printquest 3s headset standquest 3s stand 3d model
Questions people ask about a meta quest 3s headset desk stand
A compact stand for a Meta Quest 3S (191.5 × 102 × 142.5 mm) that rests the headset on a 60 mm wide saddle under the front of the strap, so the lenses face down into a 70 mm recess and stay out of the sun. The column is 160 mm tall on a 120 × 120 mm base with a weight pocket for coins. Print in PETG upright, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Quest 3S stand, 120×120 mm base with weight pocket, 160 mm column, 60 mm saddle, 70 mm lens recess, 3 mm walls.
The Quest 3 is taller at the front and rests higher on the saddle. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Magnetic miniature movement trayA movement tray lets you slide a whole unit of miniatures across the board in one motion.Nintendo Switch 2 Pro Controller display standA low cradle that holds a Nintendo Switch 2 Pro Controller (or the original Switch Pro Controller, about 152 x 106 x 60 mm) upright on a shelf with the face…D&D dice tower shaped like a dungeon turretA crenellated stone turret that doubles as a dice tower for Dungeons & Dragons, Pathfinder and Warhammer sessions.Nintendo Switch 2 game-card display rail 24A 280 mm rail that displays 24 Switch / Switch 2 game cards in 22 × 4 mm slots at 15 degrees.Steam Deck OLED front-plate standA stand that holds a Deck OLED (about 298 × 117 × 49 mm) by the front plate at 30 degrees so the kickstand is not the only option.Universal controller wall rack for six padsA wall rack for six mixed controllers (DualSense, Xbox, Switch Pro and 8BitDo Ultimate pads) with 34 mm wide arms, 50 mm deep and a 6 mm lip, that fit the ga…