1
Brackets & mounts
M5Stack AtomS3 Lite mount
This is not a fixed STL. SpeakCAD generates the m5stack atoms3 lite mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an AtomS3 Lite mount, 24.6×24.6 mm cradle, 9.5×3.8 mm USB-C gap, 7×5 mm Grove gap, M2 back screw, 40×30×4 mm plate, two 3.5 mm holes.
What a m5stack atoms3 lite mount is
A mount that holds an M5Stack AtomS3 Lite (24 × 24 × about 10 mm) on a wall, desk or 2020 extrusion. The cradle is 24.6 × 24.6 mm with a 9.5 × 3.8 mm USB-C gap, a 7 × 5 mm Grove port gap and an M2 screw through the Atom's back hole. The plate is 40 × 30 × 4 mm with two 3.5 mm holes. Print flat in PETG.
The AtomS3 with screen is taller and the Atom Matrix has a different button position. Open the ready-made model in SpeakCAD for free, change any millimetre, then download the STL.
People also search
atoms3 lite mount stlm5stack atoms3 lite case 3d printatoms3 lite wall mountm5stack atom s3 holder 3d model
Questions people ask about a m5stack atoms3 lite mount
A mount that holds an M5Stack AtomS3 Lite (24 × 24 × about 10 mm) on a wall, desk or 2020 extrusion. The cradle is 24.6 × 24.6 mm with a 9.5 × 3.8 mm USB-C gap, a 7 × 5 mm Grove port gap and an M2 screw through the Atom's back hole. The plate is 40 × 30 × 4 mm with two 3.5 mm holes. Print flat in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an AtomS3 Lite mount, 24.6×24.6 mm cradle, 9.5×3.8 mm USB-C gap, 7×5 mm Grove gap, M2 back screw, 40×30×4 mm plate, two 3.5 mm holes.
The AtomS3 with screen is taller and the Atom Matrix has a different button position. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
GL.iNet Mango router wall mountA small wall mount for a GL.iNet Mango (GL-MT300N-V2, 58 × 58 × 25 mm) so it can sit behind a TV or next to a smart plug as a mini access point.Samsung Galaxy S24 Ultra dashboard phone cradle mountA cradle for the Samsung Galaxy S24 Ultra (162.3 x 79 x 8.6 mm) that clips onto a standard 17 mm ball from an adhesive dash base, so the phone sits at eye le…Amazon Echo Dot 5th gen outlet shelf mountA small shelf that sits over a wall outlet and carries an Amazon Echo Dot 5th gen, a 100 mm sphere-ish speaker 89 mm tall weighing about 300 g, so it takes n…Owlet Dream Sock base station wall mountA cradle that holds the Owlet Dream Sock or Smart Sock 3 base station on the nursery wall at eye level so the glowing ring is visible from the door and the c…Owlet Cam 2 crib-rail clampA clamp that holds an Owlet Cam 2 on a 20–40 mm crib rail with a 15 degree downward tilt.Milwaukee SHOCKWAVE bit-case wall clipA clip that hangs a SHOCKWAVE bit case (about 160 × 110 × 30 mm) on a stud so the case is not in a drawer.