1
Brackets & mounts
LD2450 presence sensor tilt wall mount
This is not a fixed STL. SpeakCAD generates the ld2450 presence sensor tilt wall mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an LD2450 wall mount tilted 15 degrees down, 45×16 mm radar pocket behind 1.2 mm front, ESP32-C3 rear bay, two 4 mm holes 40 mm apart.
What a ld2450 presence sensor tilt wall mount is
A wall mount for an HLK-LD2450 tracking radar (about 44 × 15 mm) that tilts it 15 degrees down, so the 120 degree field covers the room instead of the ceiling. The radar pocket is 45 × 16 mm behind a 1.2 mm solid front, a rear bay takes an ESP32-C3 SuperMini, and the base has two 4 mm screw holes 40 mm apart. Print in PLA with 1.6 mm walls.
An LD2410C is a presence-only board of a different size. Open the ready-made mount in SpeakCAD for free, set the tilt angle in the chat or the viewer, then download the STL.
People also search
ld2450 mount stlld2450 case 3d printld2450 wall mountld2450 presence sensor enclosure 3d model
Questions people ask about a ld2450 presence sensor tilt wall mount
A wall mount for an HLK-LD2450 tracking radar (about 44 × 15 mm) that tilts it 15 degrees down, so the 120 degree field covers the room instead of the ceiling. The radar pocket is 45 × 16 mm behind a 1.2 mm solid front, a rear bay takes an ESP32-C3 SuperMini, and the base has two 4 mm screw holes 40 mm apart. Print in PLA with 1.6 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an LD2450 wall mount tilted 15 degrees down, 45×16 mm radar pocket behind 1.2 mm front, ESP32-C3 rear bay, two 4 mm holes 40 mm apart.
An LD2410C is a presence-only board of a different size. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Fiber ONT adjustable wall bracketA wall bracket for a fiber ONT that holds the box on edge above the fiber outlet so the patch lead does not bend tighter than its 30 mm minimum radius.iPad 10th gen treadmill console holder clipA cradle that hooks over the top lip of a treadmill or exercise bike console and holds an iPad 10th generation (248.6 x 179.5 x 7 mm) in landscape at a 15 de…Ring Video Doorbell 30 degree wedge mountAn angled spacer that turns a Ring Video Doorbell 2nd gen towards the path when the door sits in a recess.Valve Index headset and controller wall mountA combined wall station for the Valve Index headset and its two Knuckles controllers.Aqara Hub M3 under-shelf clipA clip that hides an Aqara Hub M3 under a 12–24 mm shelf with the USB-C facing out.Makita 40V XGT battery wall mountA mount that hangs four 40V XGT batteries (about 90 × 80 mm) on a stud so they are not mixed with 18V LXT packs.