1
Enclosures & cases
L298N motor driver case
This is not a fixed STL. SpeakCAD generates the l298n motor driver case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an L298N driver case, 45×45×30 mm cavity, M3 standoffs at 37×37 mm, terminal slots on three sides, header slot, heatsink grille.
What a l298n motor driver case is
A vented case for the red L298N dual motor driver (43 × 43 mm, about 27 mm tall with the heatsink). The cavity is 45 × 45 × 30 mm with four M3 standoffs at 37 × 37 mm, open slots over the screw terminals on three sides, a slot for the logic header and a grille over the heatsink. Walls are 1.6 mm. Print upside down in PETG.
The smaller TB6612FNG and MX1508 boards are about 20 mm across and need their own case. Open the ready-made model in SpeakCAD for free, change any millimetre, then download the STL.
People also search
l298n case stll298n motor driver enclosure 3d printl298n housingl298n box 3d model
Questions people ask about a l298n motor driver case
A vented case for the red L298N dual motor driver (43 × 43 mm, about 27 mm tall with the heatsink). The cavity is 45 × 45 × 30 mm with four M3 standoffs at 37 × 37 mm, open slots over the screw terminals on three sides, a slot for the logic header and a grille over the heatsink. Walls are 1.6 mm. Print upside down in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an L298N driver case, 45×45×30 mm cavity, M3 standoffs at 37×37 mm, terminal slots on three sides, header slot, heatsink grille.
The smaller TB6612FNG and MX1508 boards are about 20 mm across and need their own case. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
INA219 power meter caseA case for an INA219 current sensor module (about 25 × 22 mm), a 0.91 inch OLED and a Nano or ESP32-C3 as an inline power meter.HC-SR501 PIR sensor dome caseA case for an HC-SR501 PIR module (32 × 24 mm board) that lets its 23 mm Fresnel dome poke through a 23.5 mm front hole.Handheld control box for four push buttonsA palm-sized housing for four 12 mm momentary push buttons, useful as a shortcut pad or a machine pendant.Wemos D1 Mini enclosure with DHT22 sensor slotA wall-mountable box for a Wemos D1 Mini (34.2 x 25.6 mm) with a dedicated slot for a DHT22 temperature and humidity sensor.ESP32-S3 SuperMini case with USB-CA snap case for an ESP32-S3 SuperMini with a USB-C window, two GPIO slots and 2 mm vents.Arduino Mega 2560 caseA case for an Arduino Mega 2560 R3 (101.5 × 53.3 mm).